1 Scope
This standard specifies terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of transparent colorless and body-tinted flat glass.
This standard is applicable to soda-lime-silica flat glass produced with various processes.
This standard is not applicable to patterned glass and wire glass.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 1216 External Micrometer
GB/T 2680 Determination of Light Transmittance, Solar Direct Transmittance, Total Solar Energy Transmittance and Ultraviolet Transmittance for Glass in Building and Related Glazing Factors
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 8170 Rules of Rounding Off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 9056 Metal Ruler
GB/T 11942 Colorimetric Methods for Color Building Materials
GB/T 15764 Standard Terminology of Flat Glass
JB/T 2369 Reading Microscope
JB/T 8788 Feeler Gauge
QB/T 2443-1999 Steel Measuring Tapes
3 Terms and Definitions
For the purposes of this standard, the terms and definitions given in GB/T 15764 and the following apply.
Contents
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Package, Transport and Storage
