1 Scope
This part specifies the dedicated terminologies of rotating electrical machine.
This part is applicable to set standard, prepare technical documents, draft and translate professional manual, teaching materials, books and periodicals for the usage of personal (they are engaged in production, scientific research, application and education in electrician and relevant fields) in relevant departments.
The terminologies specified in this part are consist with the content in relevant part of GB/T 2900.1 Electrotechnical Terminology - Fundamental Terms; if necessary, the undefined terminologies in this part may be defined in relevant standards.
2 Normative References
The following documents contain provisions which, through reference in this part of GB/T 2900, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications are not applicable. However, the parties who enter into an agreement according to this part are encouraged to research whether the latest editions of these documents are applied or not. For undated references, the latest edition of the normative document is applicable to this part.
GB/T 2900.1-1992 Electrotechnical Terminology - Fundamental Terms
3 Terms and Definitions
3.1 General Terms
411-31-01
(electrical) rotating machine
an electrical apparatus depending on electromagnetic induction for its operation and having components capable of relative rotary movement and intended for converting energy
Note: This term also applies to electrical apparatus operating on the same principle and similar construction and intended for other purposes. E.g. regulation, supplying or absorbing reactive power. It is not intended to cover electrostatic machines.
411-31-02
homopolar machine
a machine in which the magnetic flux passes in the same direction from one member to the other over the whole area of a single air-gap
411-31-03
acyclic machine
a direct current homopolar machine
411-31-04
heteropolar machine
a machine having successive physical or effective poles of opposite polarity
411-31-05
direct current machine; d. c. machine
a machine incorporating an armature winding connected via a commutator to a direct current system and having magnetic poles which are excited from a source of direct or undulating current or which are permanent magnets
411-31-06
Foreword i
1 Scope
2 Normative References
3 Terms and Definations
3.1 General Terms
3.2 Generators
3.3 Motors
3.4 Special Machines
3.5 Machines for Control Systems
3.6 Qualifying Terms
3.7 Winding Arrangements
3.8 Construction of Windings
3.9 Insulation
3.10 Magnetic Parts
3.11 Brushes, Brush-Holders, Commutators, Slip-Rings, Terminations
3.12 Bearings and Lubrication
3.13 Mechanical Structure, Mounting Arrangement, Direction of Rotation
3.14 Cooling
3.15 State Variables (of a Machine)
3.16 Characteristics
3.17 Characteristic Quantities
3.18 Analytical Quantities
3.19 Parameters
3.20 Load, Duty, Rating
3.21 Operation
3.22 Testing
3.23 Excitation System and Field Winding Characteristics
Chinese Index
English Index
