1 Scope
This standard specifies the inspection items, inspection methods, inspection requirements and handling of inspection result for motor vehicles safety technology inspection.
This standard is applicable to the technical safety inspection performed by motor vehicles safety technology inspection body, as well as to the safety technology inspection on inbound motor vehicles performed by entry-exit inspection and quarantine body. Motor vehicles approved to have practical road test and those temporarily inbound may have safety technology inspection by reference to this standard.
This standard is not applicable to safety technology inspection of the tractor that runs on road, e.g. tractor towing trailer for transportation.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 1589 Limits of Dimensions, Axle Load and Masses for Road Vehicles
GB/T 3730.2 Road Vehicle - Masses - Vocabulary and Codes
GB/T 3730.3 Motor Vehicles and Towed Vehicles - Dimensions of Vehicles - Terms and Definitions
GB 4785 Prescription for Installation of the External Lighting and Light-signaling Devices for Motor Vehicles and Their Trailers
GB 7258-2012 Safety Specifications for Motor Vehicles Operating on Roads
GB 11567.1 Motor Vehicles and Trailers – Lateral Protection Requirements
GB 11567.2 Motor Vehicles and Trailers – Rear Underrun Protection Requirements
GB 13094 The Safety Requirements for Bus Construction
GB 13392 The Vehicle Mark for Road Transportation Dangerous Goods
GB 16735 Road Vehicles - Vehicle Identification Number (VIN)
GB/T 17676 Natural Gas Vehicle and Liquefied Petroleum Gas Vehicle - Identification Marks
GB 18564.1 Road Tanker for Dangerous Liquid Goods Transportation - Part 1:Technical Requirements of Atmospheric Pressure Metal Tank
GB 18986 The Safety Requirements for Light Bus Construction
GB/T 19056 Vehicle Travelling Data Recorder
GB 19151 Triangular Warning Board Used for Power-driven Vehicles
GB 20300 Safety Specifications for Road Transportation Vehicle of Explosive Substance and Chemical Toxic Substance
GB 24315 The Marker for School Bus
GB 24407 The Safety Technique Specifications of Special School
GB 25990 Rear-marking Plates for Vehicles and their Trailers
GB/T 26765 Specifications for Power-driven Vehicle Safety Inspection Business Information System and Networking
GA 36 License Plate of Motor Vehicle of the People's Republic of China
GA 802 Types of Motor Vehicle-Terms and Definitions
GA 804 Special Fixing Device for License Plate of Motor Vehicle
GA 1186 General Technical Specifications for Monitoring System of Vehicle Safety Inspection
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB 7258 and GA 802 as well as the following ones apply.
3.1
Inspection for unregistered vehicle
Safety technology inspection on the motor vehicle applying for registration, performed by motor vehicles safety technology inspection body.
Foreword i
Introduction iv
1 Scope
2 Normative References
3 Terms and Definitions
4 Inspection Items
5 Inspection Methods
6 Inspection Requirements
7 Treatment of Inspection Results
8 Requirements for the Implementation of This Standard during Transition Period
Appendix A (Normative) Overall Dimension Measurement
Appendix B (Normative) Kerb Weight Measurement
Appendix C (Normative) Braking Performance Inspection
Appendix D (Normative) Headlamp Inspection
Appendix E (Normative) Inspection of Indication Error of Speedometer
Appendix F (Normative) Inspection of Horizontal Side Slip of Steering Wheel
Appendix G (Normative) Motor Vehicle Safety Technology Inspection Report (Template)
Appendix H (Normative) Motor Vehicle Safety Technology Inspection Table (Manual Inspection)
Appendix I (Normative) Motor Vehicle Safety Technology Inspection Table (Instrumentation Inspection)
Bibliography
