1 Subject Content and Application Scope
1.1 Subject Content
This standard specifies general requirements on hazardous waste storage and requirements on hazardous waste packaging, as well as location, design, operation, safety protection, monitoring, closedown, etc.
1.2 Application Scope
This Standard is applicable to pollution control and supervisory management on storage of all hazardous wastes (except tailing), and may be applied by hazardous waste producers, operators and supervisors.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard, and have same effect to this Standard.
GB 16297 Integrated Emission Standard of Air Pollutants
GB 8978 Integrated Wastewater Discharge Standard
GB 5085.1~3 Identification Standards for Hazardous Wastes
GB 15562.2 Graphical Signs for Environmental Protection - Solid Waste Storage (Disposal) Site
GB 14554 Emission Standards for Odor Pollutants
GB/T 15555.1~12 Solid Waste - Determination of Leaching Toxicity
If the normative documents referred to are revised, the latest editions hereof apply.
3 Definitions
3.1 Hazardous waste
It refers to waste that is listed into "National Hazardous Wastes Catalogue" or has hazardous characteristics tested by the state-specified hazardous waste identification standard and method.
1 Subject Content and Application Scope
2 Normative References
3 Definitions
4 General Requirements
5 Hazardous Waste Storage Container
6 Location and Design Disciplines of Hazardous Waste Storage Facility
7 Operation and Management of Hazardous Waste Storage Facility
8 Safety Protection and Monitoring of Hazardous Waste Storage Facility
9 Closedown of Hazardous Waste Storage Facility
10 Implementation and Supervision of The Standard
Appendix A (Normative) Labeling of Hazardous Waste
Appendix B (Informative) Table 1 Chemical Compatibility of Different Hazardous Waste Type to Common Container
