1 Scope
This standard specifies classification, size, technical requirements, test method, inspection rules, packing, mark, handling, transport, storage and installation, suspension and maintenance requirements of the vehicle mark for road transportation dangerous goods.
This standard is applicable to production, application and management of vehicle mark for road transportation dangerous goods.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB 190-1990 Packing Symbol of Dangerous Goods
GB/T 191 Packaging-Pictorial Marking for Handling of Goods (GB/T 191-2000, EQV ISO 780: 1997)
GB/T 2423.1 Environmental Testing for Electric and Electronic Products-Part 2: Test Method-Test A: Low Temperature (GB/T 2423.1-2001, idt IEC 60068-2-1: 1990)
GB/T 2423.2 Environmental Testing for Electric and Electronic Products-Part 2: Test Method-Test B: High Temperature (GB/T 2423.2-2001, idt IEC 60068-2-2: 1974)
GB/T 2423.5 Environmental Testing for Electric and Electronic Products-Part 2: Test Method Test Ea and Guidance: Impact (GB/T 2423.5-1995, idt IEC 68-2-27: 1987)
GB/T 2423.10 Environmental Testing for Electric and Electronic Products-Part 2: Tests methods-Test Fc and Guidance: Vibration (Sinusoidal) (GB/T 2423.10-1995, idt IEC 68-2-6: 1982)
GB 2893 Safety Color (GB 2893-2001, neq ISO 3864: 1984)
GB/T 6543 Corrugated Box
GB 6944 Classification and Code of Dangerous Goods
GB 11806 Regulations for the Safe Transport of Radioactive Material
GB/T 18833 Retro-reflective Sheeting for Road Traffic Signs
3 Product Classification and Size
3.1 Classification
Vehicle marks for road transportation dangerous goods are divided into marker light and mark board.
3.2 Structure and type
3.2.1 Marker light
3.2.1.1 Structure
The marker light includes light body and fixtures.
Light body front of the marker light is an isosceles triangle and composed of light cover, installation bottom plate or permanent magnet (Type A marker light), rubber packing and fastener.
"Danger" is marked in the middle of the front and reverse sides of the marker light, "!" on its sides and the marker light number plate is embedded in the middle of the lower edge of the light cover front.
3.2.1.2 Type
The type is divided according to loading mass and installation mode of the vehicle and See Table 1 for details.
Foreword I
1 Scope
2 Normative References
3 Product Classification and Size
4 Technical Requirements
5 Test Method
6 Inspection Rules
7 Packing, Mark, Handling, Transport and Storage
8 Installation and Suspension Requirements
9 Maintenance of Vehicle Mark
Appendix A (Normative) Nameplate Pattern
Appendix B (Informative) Installation Position of Indication Lights
Appendix C (Informative) Suspension Position of Mark Board
