1 Scope
This standard specifies terms and definitions, requirements, marking and transportation, parking and accompanied documents of vehicles for shipping and filling high pressure hydrogen.
This standard is applicable to mobile hydrogen refueling vehicles which are refitted from customized automotive chassis for shipping and filling high pressure hydrogen.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 1589 Limits of Dimensions, Axle Load and Masses for Motor Vehicles, Trailers and Combination Vehicles
GB 4962 Technical Safety Regulation for Gaseous Hydrogen Use
GB 7258 Technical Specifications for Safety of Power-driven Vehicles Operating on Roads
GB 11567.1 Motor Vehicles and Trailers—Lateral Protection Requirements
GB 11567.2 Motor Vehicles and Trailers—Rear Underrun Protection Requirements
GB 13392 The Vehicle Mark for Road Transportation Dangerous Goods
GB 21668 Provisions of Vehicles for the Carriage of Dangerous Goods with regard to Their Specific Constructional Features
GB/T 24528-2009 Carbon Materials—Determination Method of the Bulk Density
GB/T 18411-2001 Road Vehicle—Manufacturer’s Plate
JT 230 Rubber Belt of Electrostatic Conductivity for Motor Vehicle
JT 617 The Regulation of Automobile Transportation of Dangerous Goods
JT 618 Rules of Transportation, Loading and Unloading of Dangerous Goods by Automobile
3 Terms and Definitions
Foreword iv
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Marking
6 Transportation and Parking
7 Accompanied Documents
