Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 2667-2008 Sizes for Shirts and Blouses. The following technical changes have been made with respect to GB/T 2667-2008 (the previous edition):
——The normative references are modified (see Chapter 2; Chapter 2 in Edition 2008);
——The specification setting is modified (see 3.1; 3.1 in Edition 2008);
——The "back coat length" is modified to "coat length" (see 4.1, 4.2.1, 4.2.2, 4.2.3, 4.2.4, 5.1, 5.2.1, 5.2.2, 5.2.3 and 5.2.4; 4.1, 4.2.1, 4.2.2, 4.2.3, 4.2.4, 5.1, 5.2.1, 5.2.2, 5.2.3 and 5.2.4 in Edition 2008);
——Specifications for shirts of Y size designation series are supplemented (see 4.2.1; 4.2.1 in Edition 2008);
——Specifications for shirts of A size designation series are supplemented (see 4.2.2; 4.2.2 in Edition 2008);
——Specifications for shirts of B size designation series are supplemented (see 4.2.3; 4.2.3 in Edition 2008);
——Specifications for shirts of C size designation series are supplemented (see 4.2.4; 4.2.4 in Edition 2008);
——Specifications for blouses of Y size designation series are supplemented (see 5.2.1; 5.2.1 in Edition 2008);
——Specifications for blouses of A size designation series are supplemented (see 5.2.2; 5.2.2 in Edition 2008);
——Specifications for blouses of B size designation series are supplemented (see 5.2.3; 5.2.3 in Edition 2008);
——Specifications for blouses of C size designation series are supplemented (see 5.2.4; 5.2.4 in Edition 2008).
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of SAC/TC 219 National Technical Committee on Garments of Standardization Administration of China.
The previous editions of the standard replaced by this standard are as follows:
——GB/T 2667-1981, GB/T 2667-1993, GB/T 2667-2002 and GB/T 2667-2008.
Specifications for Shirts and Blouses
1 Scope
This standard specifies the trimmed sizes for shirts and blouses.
This standard is applicable to shirts and blouses for adults which are mass produced with main shell fabric of textiles.
2 Normative References
The following documents for the application of this document are essential. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendment) applies.
GB/T 1335.1 Size Designation of Clothes - Men
GB/T 1335.2 Size Designation of Clothes - Women
3 Specification Setting
3.1 The trimmed size series shall be set by adding different ease allowances to the values of control parts for each size designation serie as stated in GB/T 1335.1 and GB/T 1335.2
3.2 A group of specifications shall be set for each part of the shirts and blouses and it is allowable to select from the size group for the same size designation.
4 Specifications for Shirts
4.1 Size designation series
Upper wear of 5·4 serie shall be based on the size designations of 170/88Y, 170/88A, 170/92B and 170/96C. The chest girth shall be classified by a span of 4 cm, the collar size by 1 cm, the shoulder across by 1.2 cm, the coat length by 2 cm, the long sleeve length by 1.5 cm, and the short sleeve length by 1 cm.
4.2 Main specifications for size designation series
4.2.1 Main specifications for shirts of 5·4 Y size designation serie are detailed in Table 1
Foreword i
1 Scope
2 Normative References
3 Specification Setting
4 Specifications for Shirts
5 Specifications for Blouses