Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 3327-1997 Furniture - Main sizes of cabinets, and the following technical changes have been made with respect to GB/T 3327-1997:
——The code of the size is modified (see clause 2; clause 2 of 1997 edition);
——The requirement for distance from the ground is deleted (3.2 of 1997 edition);
——The requirement for the drawer depth is deleted (3.2.3 of 1997 edition);
——The schematic diagram for the drawer size is modified (3.2.3 of 1997 edition);
——The requirement for the schematic diagram for the sizes of bedside cabinets is modified (see 3.2; 3.3 of 1997 edition);
——The requirement for the clear height between layers of book cabinet is modified (see 3.3; 3.4 of 1997 edition);
——The requirement for size range is deleted (see 3.4 and 3.5 of 1997 edition);
——The requirement for the sizes of low cabinets is deleted (see 3.6 of 1997 edition).
This standard was proposed by China National Light Industry Council.
This Standard is under the jurisdiction of National Technical Committee on Furniture of Standardization Administration of China (SAC/TC 480).
This standard was firstly issued in 1982 and revised in 1997 for the first time.
Furniture - Main sizes of storage units
1 Scope
This standard specifies the code and main sizes of storage units.
This standard applies to the design and production of wardrobe, bedside cabinet, book cabinet and filing cabinet, and it may also be referred to for other storage units.
2 Code
See Table 1 for the main size codes and descriptions of the storage units.
Table 1 Main size codes and descriptions of the storage units
No. Code Code description
1 B Outline width of cabinet body
2 B1 Width inside the cabinet
3 T Outline depth of cabinet body
4 T1 Depth inside the cabinet
5 H Outline height of cabinet body
6 H1 Distance between the upper edge of hanging rod and internal surface of top plate
7 H2 Distance between the upper edge of hanging rod and internal surface of bottom plate
8 H3 The height of lower edge of the drawer surface at the bottom layer above the ground
9 H4 The height of the upper edge of the mirror above the ground, and the height of the upper edge of the drawer surface at the top layer above the ground
10 H5 Clear height between layers
3 Main sizes
3.1 Wardrobes
3.1.1 See Figure 1 and Table 2 for the spatial sizes inside wardrobes.
Figure 1 Schematic diagram for spatial sizes inside wardrobes
Table 2 Spatial sizes inside the wardrobe In: mm
Depth inside the wardrobe Distance between the upper edge of hanging rod and internal surface of top plate
H1 Distance between the upper edge of hanging rod and internal surface of bottom plate
H2
Depth T1 or width B1 inside the clothes hanging cabinet Depth T1 inside the clothes folding cabinet Suitable for hanging long clothes Suitable for hanging short clothes
≥530 ≥450 ≥40 ≥1,400 ≥900
Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation.
3.1.2 The height of the upper edge of the mirror above the ground (H4) ≥1,700mm, and there is no height limit for ornamental mirrors .
Note: In case of special requirements or contract requirements, the size shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation.
3.1.3 The height of lower edge of the drawer surface at the bottom layer above the ground (H3) ≥50mm, and the height of the upper edge of the drawer surface at the top layer above the ground (H4) ≤1,250mm, see Figure 2.
Note: In case of special requirements or contract requirements, all sizes shall be noted in the contract by the supplier and the purchaser, and are not subject to this limitation.
Figure 2 Schematic diagram for drawer sizes
3.2 Bedside cabinets
See Figure 3 and Table 3 for the sizes of bedside cabinets.
