GB/T 28886-2023 Plastic windows and doors for buildings
1 Scope
This document specifies the classification, specifications, system and labeling, general requirements, technical requirements, test methods, inspection rules, marking and accompanying documents, as well as packaging, transportation and storage of plastic windows and doors for buildings.
It is applicable to PVC-U plastic windows and doors for buildings.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2518 Continuously hot-dip zinc and zinc alloy coated steel sheet and strip
GB/T 3098.21 Mechanical properties of fasteners - Stainless steel tapping screws
GB/T 5237.1 Wrought aluminium alloy extruded profiles for architecture - Part 1: Untreated profiles
GB/T 5237.2 Wrought aluminium alloy extruded profiles for architecture - Part 2: Anodized profiles
GB/T 5237.3 Wrought aluminium alloy extruded profiles for architecture - Part 3: Electrodeposition coating profiles
GB/T 5237.4 Wrought aluminium alloy extruded profiles for architecture - Part 4: Powder coating profiles
GB/T 5237.5 Wrought aluminium alloy extruded profiles for architecture - Part 5 : Paint coating profiles
GB/T 5823 Terminology for building windows and doors
GB/T 5824 Size system of opening for windows and doors in building
GB/T 6723 Cold forming open section steel for general structure
GB/T 6728 Cold forming hollow sectional steel for general structure
GB/T 7106 Test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors
GB/T 8484 Test method for thermal insulating performance for building exterior doors and windows
GB/T 8485 Graduation and test method for airborne sound insulating properties of windows and doors
GB/T 8814 Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows
GB/T 9158 Test methods of mechanics performance for windows and doors in building
GB/T 11253 Cold-rolled sheet and strip of carbon structural steels
GB/T 11793 Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows
GB/T 11944 Insulating glass unit
GB/T 11976 Graduation and test method of daylighting properties for external windows
GB/T 14155 Doorsets - Soft heavy body impact test
GB/T 14683 Silicone and modified silicone sealants for building
GB 15763.1 Safety glazing materials in building - Part 1: Fire-resistant glass
GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass
GB 16807 Fire intumescent seals
GB/T 24267 Building sealants for fire resistance
GB/T 24498 Gaskets for doors, windows and curtain walls of buildings
GB/T 29049 Doorsets - Vertical load test
GB/T 29530 Hinged or pivoted doors - Determination of the resistance to static torsion
GB/T 29739 Test method of resistance to repeat opening and closing for windows and doors
GB/T 30591 Requirements for size coordination for opening of windows and doors in building
GB/T 31433 General specification for building curtain walls, windows and doors
GB/T 32223 Building hardware for windows and doors - General requirements
GB/T 38252 Test method of fire-resistant integrity for building windows and doors
GB/T 38586 Vacuum insulating glass
JC/T 2304 Technical specification of energy efficient glass for building
JC/T 2450 Glass used in the transparent part of passive building
JG/T 176 Function structure measurement of plastic window/door and profile
JG/T 386 Complex weatherstrip for doors and windows of buildings
JG/T 440 Test method for shading performance of windows and doors
JG/T 455 Tempered glass for window, door and curtain wall in buildings
JGJ 113 Technical specification for application of architectural glass
JGJ/T 151 Calculation specification for thermal performance of windows, doors and glass curtain-walls
JGJ 362 Technical specification for design and fabricating of plastic doors and windows
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 5823, GB/T 5824 and GB/T 8814, as well as the following apply.
3.1
plastic doors
doors adopting unplasticized polyvinyl chloride (PVC-U) profiles as base material and lined with reinforced material
3.2
plastic windows
windows adopting unplasticized polyvinyl chloride (PVC-U) profiles as base material and lined with reinforced material
3.3
plastic windows and doors
generic name for plastic doors and plastic windows
3.4
aluminum cladding plastic windows and doors
plastic windows and doors decorated with aluminum gusset plates at external part of the plastic profiles
3.5
PBT reinforced PVC-U windows and doors
windows and doors processed and manufactured by co-extruded composite profile, which are composed of polyester reinforced material PBT and PVC-U
3.6
mechanical joint
connection between the profiles via special connectors
3.7
transom or mullion
generic name for transom, mullion and stile of windows and doors
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification, specifications, system and labeling
5 Common requirements
6 Technical requirements
8 Inspection rules
9 Marking and accompanying documents
10 Packaging, transportation and storage
Annex A (Informative) Standard lists for common materials
Annex B (Normative) Technical requirements of reinforced steel
Annex C (Informative) Inertia moment of reinforced steel
Annex D (Informative) Common configuration and heat transfer coefficient of plastic side-hung window
