标准编号:	GB/T 24498-2009
中文名称:	建筑门窗、幕墙用密封胶条
英文名称:	Gaskets for doors,windows and curtain walls of buildings
中标分类:	Q24    密封材料
行业分类:	GB    国家标准
ICS分类:	91.100.50 91.100.50    粘合料、密封材料 91.100.50
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国家标准化管理委员会
发布日期:	2009-10-30
实施日期:	2010-4-1
标准状态:	valid
翻译语言:	英文
文件格式:	PDF
中文字符数:	16000 字
翻译价格(元):	290.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies the terms and definitions, classification, code and labelling, requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of gaskets for doors，windows and curtain walls of buildings. This standard is applicable to vulcanized rubber gaskets and thermoplastic elastomeric gaskets for doors, windows and curtain walls of buildings. It is not applicable to foam and composite gaskets. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies. GB 250-1995 Grey scale for assessing change in colour GB/T 528-2009 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties GB/T 531-1999 Rubber — Determination of indentation hardness by means of pocket hardness meters GB/T 1682-1994 Rubber, vulcanized — Determination of low-temperature brittleness (single test piece method) GB/T 2411-2008 Plastics and ebonite — Determination of indentation hardness by means of a durometer（Shore Hardness） GB/T 2828.1 Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 3512-2001 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests — Air-oven method GB/T 3672.1-2002 Rubber — Tolerances of products — Part 1: Dimensional tolerances GB/T 3672.2-2002 Rubber — Tolerances of products — Part 2: Geometrical tolerances GB/T 5470-2008 Plastics — Determination of the brittleness temperature by impact GB/T 7759-1996 Rubber, vulcanized or thermoplastic — Determination of compression set at ambient elevated or low temperatures GB/T 7141-2008 Plastics — Methods of heat aging GB/T 7762-2003 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking — Static strain test GB/T 9881-2008 Rubber — Vocabulary GB/T 14436 General principles of industrial product guarantee documents GB/T 16422.2-1999 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources GB 16776-2005 Structural silicon sealant for building GB/T 20739-2006 Rubber products — Guidelines for storage

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification, code and labellings 5 Requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transportation and storage Annex A (Normative) Testing records and requirements Annex B (Informative) Available color series of common main materials of gaskets