1 Scope
This standard specifies product classification, and model marking method, requirements, methods for test and inspection, inspection rules, marking, packaging, storage and transportation, ex-factory technical documents etc.of the dimensionally stable anode electrolyzer for chlorate.
This standard is applicable to diaphragm-free dimensionally stable anode electrolyzers for chlorate industry (hereinafter referred to as electrolyzers).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191-2008 Packaging — Pictorial marking for handling of goods (eqv ISO 780: 1997)
GB/T 700 Carbon Structural Steels
GB/T 2040 Copper and copper alloy sheet
GB/T 3190 Wrought aluminium and aluminium alloy — Chemical composition
GB/T 3274 Hot-rolled plates, sheets and strips of carbon structural steels and high strength low alloy structural steels
GB/T 3620.1 Designation and composition of titanium and titanium alloys
GB/T 3620.2 Titanium and titanium alloys—permissible variations of chemical composition for wrought product analysis
GB/T 3621 Titanium and titanium alloy plate and sheet
GB/T 3623 Titanium and titanium alloy wire
GB/T 5231 Wrought copper and copper alloys chemical composition limits and forms of wrought products
GB/T 8547 Titanium clad steel plate
GB/T 9969 General principles for preparation of instructions for use of industrial products
GB/T 10858 Aluminium and aluminium alloy wires and rods
GB/T 14957 Steel wires for melt welding
HG/T 2471 Coating of dimensionally stable anode for electrolyzer
JB/T 4730.5 Nondestructive testing of pressure equipments — Part 5: Penetrant testing
QB/T 3624 Polytetrafluoroethylene tube
QB/T 3625 Polytetrafluoroethylene plate
QB/T 4041 Polytetrafluoroethylene rod
3 Product classification, and model marking method
3.1 Product classification and code
The products of electrolyzer can be classified into monpolar and bipolar types according to the different connection modes of metal anode and cathode, and their codes are specified in Table 1
Foreword i
1 Scope
2 Normative references
3 Product classification, and model marking method
4 Requirements
5 Methods for test and inspection
6 Inspection rules
7 Marking, packaging, storage and transportation, ex-factory technical documents
