1 Scope
This standard specifies the terms and definitions, classification and model, technical requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of vehicle-mounted mobile elevating work platform.
It is applicable to the vehicle-mounted mobile elevating work platform (hereinafter refer to as “the vehicle”) with maximum working height less than 100m.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 507 Insulating liquids - Determination of the breakdown voltage at power frequency
GB 1589 Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles
GB/T 3766 Hydraulic fluid power - General rules and safety requirements for systems and their components
GB 3847 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equipped with C.I.E.
GB/T 4208-2017 Degrees of protection provided by enclosure (IP code)
GB 5226.1-2008 Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 7258 Technical specifications for safety of power-driven vehicles operating on roads
GB/T 7935 Hydraulic fluid power - General requirements for hydraulic components
GB/T 9969 General principles for preparation of instructions for use of industrial products
GB 11567 Motor vehicles and trailers-lateral and rear underrun protection requirements
GB/T 12534 Motor vehicles - General rules of road test method
GB/T 14039-2002 Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
GB/T 14048.5 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching element - Electromechanical control circuit devices
GB/T 16927.1 High-voltage test techniques - Part 1: General definitions and test requirements
GB 17691 Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
GB 18352.5 Limits and measurement methods for emissions from light-duty vehicles (CHINA5)
GB/T 20082 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
GB/T 25849-2010 Mobile elevating work platforms - Design calculations, safety requirements and test methods
GB/T 26473 Cranes - Safety requirements for loader cranes
GB/T 33081 Mobile elevating work platforms - Symbols for operator controls and other displays
JB/T 5937 Engineering machinery - General technical specifications for gray pig iron parts
JB/T 5939 Engineering machinery - General technical specifications for steel castings
JB/T 5943 Engineering machinery - General technical specifications for weldments
JB/T 5946 Engineering machinery - General technical specifications for paint coating
JB/T 12577 Loader cranes
QC/T 252 Type approval test regulations for special automobile
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 25849-2010 and the following apply. For the convenience of application, some terms and definitions in GB/T 25849-2010 are relisted as follows.
3.1
vehicle-mounted mobile elevating work platform
a mobile elevating work platform using a fixed road vehicle as the chassis and operated by the vehicle operator
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and model
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
