标准编号:	GB/T 18430.1-2007
中文名称:	蒸气压缩循环冷水(热泵)机组第1部分:工业或商业用及类似用途的冷水(热泵)机组
英文名称:	Water chilling(heat pump) packages using the vapor compression cycle—Part 1:Water chilling(heat pump) packages for industrial & commercial and similar application
中标分类:	J73    制冷设备
行业分类:	GB    国家标准
ICS分类:	27.200 27.200    制冷技术 27.200
发布机构:	国家质量监督检验检疫总局 国家标准化管理委员会
发布日期:	2007-11-5
实施日期:	2008-2-1
标准状态:	superseded
被新标准替代:	GB/T 18430.1-2024 蒸气压缩循环冷水（热泵）机组 第1部分：工业或商业用及类似用途的冷水（热泵）机组
被替代日期:	2025-4-1
替代旧标准:	GB/T 18430.1-2001 蒸汽压缩循环冷水（热泵）机组工商业用和类似用途的冷水（热泵）机组
翻译语言:	英文
文件格式:	PDF
中文字符数:	20000 字
翻译价格(元):	1400.0
交付时间:	付款后 1 个工作日

1 Scope This Part specifies terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marks, package and storage of motor-operated packages using vapor compression refrigeration cycle for industrial & commercial and similar application. This Part is applicable to water chilling(heat pump)packages (over 50kW cooling capacity) for centralized air conditioning or process and is also applicable to packages used to prevent freezing caused by outdoor air temperature dropping or used as refrigerating (heating) packages. Packages driven by motor (diesel engine or gas engine) or turbine engine (steam turbine or combustion gas turbine) could also refer to this Part. This Part is not applicable for drinking water and beverage or used as industrial packages, which do not use water as the refrigerating (heating) agent. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 18430. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.

Contents Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Type and Basic Parameters 5 Requirements 6 Test Methods 7 Inspection Rules 8 Marking, Package and Storage Appendix A (Normative) Measurement (Sampling Method) for the Dry-Humid Bulb Temperature Denoting the Package Air Appendix B (Normative) Measurement for the Water Side Pressure Loss Of The Package Appendix C (Normative) Determination for the Fouling Factor Revision Temperature Difference of the Simulation Package Water Side Appendix D (Informative) Cooling Water Quality Appendix E (Informative) Calculation Sample for Part Load Value