1.0.1 This code is formulated with a view to guaranteeing the construction quality of masonry structure engineering and realizing advanced technology, reasonable process, construction safety, energy conservation and environmental protection.
1.0.2 This code is applicable to the construction of masonry structure engineering, like brick, stone and masonry block, of constructional engineering.
1.0.3 The construction of masonry structure engineering shall not only meet the requirements stipulated in this code, but also complies with those in the current relevant ones of the nation.
Foreword I
1. General Provisions
2. Terms
3. Basic Requirements
3.1 Construction Preparation
3.2 Control Measures
3.3 Technical Requirements
4. Raw Materials
4.1 General Requirements
4.2 Cement
4.3 Sand
4.4 Block
4.5 Steel Bar
4.6 Lime, Lime Putty and Fly Ash
5. Masonry Mortar
5.1 General Requirements
5.2 Ready-mixed Mortar
5.3 On-site Mixing Mortar
5.4 Mixing Mortar
5.5 Mortar-cube Making and Curing
6. Brick Masonry Engineering
6.1 General Requirements
6.2 Masonry
6.3 Quality Inspection
7. Concrete Small-sized Hollow Block Masonry Engineering
7.1 General Requirements
7.2 Masonry
7.3 Concrete Core Column
7.4 Quality Inspection
8. Stone Masonry Engineering
8.1 General Requirements
8.2 Masonry
8.3 Earth-retaining Wall
8.4 Quality Inspection
9. Reinforced Masonry Engineering
9.1 General Requirements
9.2 Reinforced Brick Masonry Construction
9.3 Reinforced Block Masonry Construction
9.4 Quality Inspection
10. Filler Wall Masonry Engineering
10.1 General Requirements
10.2 Masonry
10.3 Quality Inspection
11. Winter and Rain Construction
11.1 Winter Construction
11.2 Rain Construction
12. Safety and Environmental Protection
12.1 Safety
12.2 Environmental Protection
Appendix A Grade Evaluation and Check of Masonry Engineering Construction Quality Control
Appendix B Construction Method for Bonded Rebar of Steel Tie
Appendix C Quality Inspection for Rebar Planting Construction of Steel Tie
Explanation of Wording in this Code
List of Quoted Standards