1 General Provisions
1.0.1 This code is formulated with view to standardizing the working at height of building construction and its management as well as realizing safe protection, advanced technology and economic rationality.
1.0.2 This code is applicable to operation like edge-near, opening, climbing, hanging, operating platform, cross operation and safety net erection in working at height of building engineering construction.
This code is also applicable to working at height of other constructions at all kinds of caves, pits, ditches and grooves.
1.0.3 During working at height of building construction, not only the requirements stipulated in this code but also those in the current relevant standards of the nation shall be complied with.
2 Terms and Symbols
2.1 Terms
2.1.1 working at height
operation carried out at falling height datum plane of 2m and above with the possibility of falling
2.1.2 edge-near operation
working at height on working face with or without enclosure facilities at edge and less than 800mm in height, including working at height on slab edge, flight of steps edge, roof edge, balcony edge and edges of all kinds of pits, ditches and grooves
2.1.3 opening operation
working at height on ground, floor, roof and wall surface where people or materials may fall from opening with height of 2m or above
2.1.4 climbing operation
... ...
... ...
3 Basic Requirements
3.0.1 For building construction involving edge-near and opening operation, climbing and hanging operation, operating platform, cross operation and erection of safety net, technical safety measures for working at height shall be formulated in construction organization design or construction scheme.
Foreword i
1 General Provisions
2 Terms and Symbols
2.1 Terms
2.2 Symbols
3 Basic Requirements
4 Edge-near and Opening Operation
4.1 Edge-near Operation
4.2 Opening Operation
4.3 Protective Railings
5 Climbing and Hanging Operation
5.1 Climbing Operation
5.2 Hanging Operation
6 Operating Platform
6.1 General Requirements
6.2 Movable Operating Platform
6.3 Floor Type Operating Platform
6.4 Cantilevered Operating Platform
7 Cross Operation
7.1 General Requirements
7.2 Safety Precautions
8 Safety Nets in Building Construction
8.1 General Requirements
8.2 Erection of Safety Nets
Annex A Protective Railings Calculation for Design
Annex B Movable Operating Platform Calculation for Design
Annex C Cantilevered Operating Platform Calculation for Design
Explanation of Wording in This Code
List of Quoted Standards
