Artificial Fur Garment
1 Scope
This standard specifies all technical characteristics such as the requirements, test methods, inspection classification rules, and marking, packaging, transportation and storage for artificial fur garment.
This standard is applicable to the artificial fur garment which is produced with chemical fiber as the main material and relatively-long fur cloth as the fabric. Other artificial fur garments may also refer to the provisions of this standard.
This standard is not applicable to the garments for infants at the age of 36 months or below.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 251 Textiles - Tests for Color Fastness - Grey Scale for Assessing Staining
GB/T 1335 (all parts) Standard Sizing Systems for Garments
GB/T 3921-2008 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
GB/T 8629-2001 Textiles-Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles-Determination of Dimensional Change in Washing and Drying
GB/T 18132 Silk Garments
GB 18401 National General Safety Technical Code for Textile Products
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 31907 Method of Garment Measurement
FZ/T 80002 Marking, Packaging, Transportation and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
FZ/T 80007.3 Dry Wash Resistance Test Method for Garments Used Adhesive Interlining
3 Requirements
3.1 Instructions for use
The instructions for use of finished products shall be in accordance with those specified in GB 5296.4.
3.2 Size specification
3.2.1 The size designation shall be selected in accordance with those specified in GB/T 1335.
3.2.2 The specification for the main positions of finished products shall be designed independently according to the relevant requirements of GB/T 1335.
3.3 Raw materials
Foreword I
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Classification Rules
6 Marking, Packaging, Transportation and Storage
