标准编号:	FZ/T 81008-2021
中文名称:	茄克衫
英文名称:	Jackets
中标分类:	Y76    服装、服饰品
行业分类:	FZ    纺织行业标准
ICS分类:	61.020 61.020    服装 61.020
发布机构:	中华人民共和国工业和信息化部
发布日期:	2021-3-5
实施日期:	2021-7-1
标准状态:	valid
替代旧标准:	FZ/T 81008-2011 茄克衫
翻译语言:	英文
文件格式:	PDF
中文字符数:	15000 字
翻译价格(元):	830.0
交付时间:	付款后 1 个工作日

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. This standard is developed in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 81008-2011 Jackets and the following main technical changes have been made with respect to FZ/T 81008-2011. ——The application scope of the standard is modified (see Clause 1, Clause 1 of Edition 2011); ——The normative references are modified and supplemented (see Clause 2; Clause 2 of Edition 2011); ——The requirements of instructions for use are modified (see 3.1; 3.1 of Edition 2011); ——The requirements of size specification are modified (see 3.2; 3.2 of Edition 2011); ——The assessment requirements of lining are modified, and provisions in "Except in special design” are deleted (see 3.3.2; 3.3.2 of Edition 2011); ——The assessment requirements of accessories are modified and supplemented (see 3.3.3; 3.3.3 of Edition 2011); ——The assessment requirements of wrap and weft yarns are modified (see 3.4; 3.4 of Edition 2011); ——The assessment requirements of strip and plaid matching are modified (see 3.5; 3.5 of Edition 2011); ——The assessment requirements of splicing are deleted (see 3.6 of Edition 2011); ——The assessment requirements for color difference of part covered with adhesive interlining are deleted (see 3.7.2 of Edition 2011); ——The assessment requirements of appearance defects are modified (see 3.7, 3.8 of Edition 2011); ——The division of part in Figure 1 is modified (see 3.7, 3.8 of Edition 2011); ——The assessment requirements for sewing are modified (see 3.8, 3.9 of Edition 2011); ——The requirements for ironing are modified (see 3.10; 3.11 of Edition 2011); ——The requirements of physical and chemical properties are modified and merged (see 3.11; 3.12 of Edition 2011); ——The contents of washing resistance are deleted (see 3.12.1 of Edition 2011); ——The assessment requirements of color fastness to transfer in joints are added (see 3.11); ——The assessment requirements for color fastness to soaping and color fastness to dry cleaning of decorating parts and embroidery are modified and supplemented (see 3.11; 3.12.3.2 of Edition 2011); ——The assessment requirements of tear force are added (see 3.11); ——The assessment requirements of appearance quality after washing are modified and supplemented (see 3.11; 3.12.1.3 of Edition 2011) ——The inspection tools are modified (see 4.1; 4.1 of Edition 2011); ——The requirements for specification determination are modified (see 4.2; 4.2 of Edition 2011); ——The requirements for appearance determination are modified (see 4.3; 4.3 of Edition 2011); ——The requirements for the determination of physical and chemical properties are modified (see 4.4; 4.4 of Edition 2011); ——The judgment basis for appearance quality defects are modified and supplemented (see 5.2.3; 5.2.3 of Edition 2011); ——The sampling rules and judgment rules are modified (see 5.3 and 5.4; 5.3 and 5.4 of Edition 2011); ——The annex "Test method for seam slippage" is deleted (see Annex A of Edition 2011). This standard was proposed by China National Textile and Apparel Council. This standard is under the jurisdiction of National Technical Committee on Garments of Standardization Administration of China (SAC/TC 219). The previous editions of this standard are as follows: ——FZ/T 81008-1994, FZ/T 81008-2004 and FZ/T 81008-2011. Jackets 1 Scope This standard specifies the requirements, inspection methods, inspection rules and marking, packaging, transportation and storage of jackets. This standard is applicable to the jackets mainly made of woven fabrics. This standard is not applicable to the garments for infants aged 36 months and below. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documents (including any amendments) applies. GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in color GB/T 1335 (All parts) Standard sizing systems for garments GB/T 3917.2 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) GB/T 3921-2008 Textiles - Tests for color fastness - Color fastness to washing with soap or soap and soda GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25 GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to dry cleaning using perchloroethylene solvent GB/T 8427-2019 Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing GB/T 8630 Textiles - Determination of dimensional change in washing and drying GB/T 14801 Test method for skewness and bow in woven and knitted fabrics GB 18401 National general safety technical code for textile products GB/T 21294 Testing methods of physical and chemical performance of garments GB/T 21295-2014 Requirements of physical and chemical performance of garments GB/T 29862 Textiles - Identification of fiber content GB/T 31127-2014 Textiles - Tests for colour fastness - Colour fastness to transfer in joints GB 31701 Safety technical code for infants and children textile products GB/T 31702 Testing method for sharpness of attached components on textile products GB/T 31907 Method of garment measurement FZ/T 80002 Marking, packaging, transportation and storage for garments FZ/T 80004 Rule for garments delivery inspection FZ/T 80007.1 Test method of peeled off strength value for garments used adhesive interlining FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining Sample photos of appearance defects on M&F unlined and padded garments and M&F children's unlined garments 3 Requirements 3.1 Instructions for use Instructions for use shall comply with the requirements of GB/T 5296.4 and GB 31701. 3.2 Size specification 3.2.1 Size specification shall be set according to the requirements of GB/T 1335. 3.2.2 The specification of main parts shall be designed according to the relevant requirements of GB/T 1335. 3.3 Raw materials 3.3.1 Shell fabric Shell fabric in conformity to the quality requirement of this standard shall be selected according to the relevant standards for textile fabrics. 3.3.2 Lining Lining suitable for the applied shell fabric and complying with the quality requirements of this standard shall be adopted. 3.3.3 Accessories 3.3.3.1 Lining cloth, shoulder pad, border lace and pocket bag Lining cloth, shoulder pad, border lace and pocket bag suitable for the performance and color of the adopted fabric and lining shall be used and their quality shall meet the requirements of this standard. 3.3.3.2 Sewing thread, rope belt and elastic ribbon Sewing thread, rope belt and elastic ribbon (except ornamental thread and belt) suitable to the performance of the used shell fabric, lining and accessories shall be adopted. 3.3.3.3 Button, zipper and other accessories Buttons (except decorative buttons), zippers and other accessories suitable for the adopted shell fabric shall be used. Button, ornamental button, zipper and other accessories shall be smooth in surface and free of burr, damage, defect and accessible sharp tip or edge. The zipper shall mesh in good condition and run smoothly. Note: Accessible sharp tip or edge are the sharp edge and tip on finished product that may cause harm to human skin under normal wearing. 3.4 Warp and weft yarn 3.4.1 The permissible yarn skewness of the top collar, back and sleeve shall not be greater than 3%. The front bottom hem shall be free from any upwarp. 3.4.2 The weft skewness of yarn-dyed plaid fabrics shall not be greater than 3%. 3.5 Strip and plaid matching 3.5.1 Obvious strips or plaids of 1.0cm or above on shell fabric shall comply with those specified in Table 1. Table 1 In cm Parts Requirements for strip and plaid matching Remarks Left and right fronts Strips shall be straight and plaids shall match each other horizontally with the mutual deviation not greater than 0.3 If the sizes of strip and plaid are different, the upper half of the clothes length shall prevail Pocket and front Strips and plaids are matched with each other respectively with the mutual deviation not greater than 0.3. The patch pockets with inclined strips and plaids shall be symmetrical bilaterally with the mutual deviation not greater than 0.5 (except for the shadow strips and plaids) If the sizes of strips and plaids are different, the front part of pocket shall prevail Collar point and lapel Strips are symmetrical with the mutual deviation not greater than 0.2 In case of any shadow plaid, apparent strip and plaid shall prevail Sleeves Strips are straight; plaids are matched with each other horizontally; both sleeves shall be symmetrical in relation to the sleeve top, with the mutual deviation not greater than 0.8 — Back seam Strips are matched with each other and plaids are matched each other horizontally, with the mutual deviation not greater than 0.3 — Side seam Plaids are matched with each other horizontally and the mutual deviation 10.0 below the armhole is not greater than 0.4 — Note: Except in special design. 3.5.2 Shell fabrics have obvious stripes or plaids of 0.5cm~1.0cm; for pocket and the front, stripes and plaids are matched with each other, with mutual deviation not greater than 0.2cm. 3.5.3 The grain direction of nip-up and down pile and checkerboard weave fabric is consistent all over the body. 3.5.4 Shell fabric with special pattern shall be subject to the main pattern and the grain direction all over the body shall be consistent. 3.6 Color difference 3.6.1 The color difference of top collar, lapel and front shawl from the front is greater than Grade 4, and that of other surface part is not lower than Grade 4. 3.6.2 The color difference of lining shall not be lower than Grade 3-4. 3.7 Appearance defects The defect permissibility for each part of finished product shall comply with those specified in Table 2. See Figure 1 for division of each part of finished product. Only one defect within permissibility is permissible at each part. The defects not covered in this standard shall be in accordance with the requirements for similar ones in Table 2 based on their forms.

1 Scope 2 Normative references 3 Requirements 4 Inspection methods 5 Inspection rules 6 Marking, packaging, transportation and storage

茄克衫 1 范围 本标准规定了茄克衫的要求、检验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以纺织机织物为主要面料生产的茄克衫。 本标准不适用于年龄在36个月及以下的婴幼儿服装。 2 规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。 GB/T 250 纺织品 色牢度试验 评定变色用灰色样卡 GB/T 1335(所有部分) 服装号型 GB/T 3917.2 纺织品 织物撕破性能 第2部分：裤形试样(单缝)撕破强力的测定 GB/T 3921—2008 纺织品 色牢度试验 耐皂洗色牢度 GB/T 4802.1—2008 纺织品 织物起毛起球性能的测定 第1部分：圆轨迹法 GB/T 4841.3 染料染色标准深度色卡 2/1、1/3、1/6、1/12、1/25 GB/T 5296.4 消费品使用说明 第4部分：纺织品和服装 GB/T 5711 纺织品 色牢度试验 耐四氯乙烯干洗色牢度 GB/T 8427—2019 纺织品 色牢度试验 耐人造光色牢度：氙弧 GB/T 8629—201 7 纺织品 试验用家庭洗涤和干燥程序 GB/T 8630 纺织品 洗涤和干燥后尺寸变化的测定 GB/T 14801 机织物与针织物纬斜和弓纬试验方法 GB 18401 国家纺织产品基本安全技术规范 GB/T 21294 服装理化性能的检验方法 GB/T 21295—2014 服装理化性能的技术要求 GB/T 29862 纺织品 纤维含量的标识 GB/T 31127—2014 纺织品 色牢度试验 拼接互染色牢度 GB 31701 婴幼儿及儿童纺织产品安全技术规范 GB/T 31702 纺织制品附件锐利性试验方法 GB/T 31907 服装测量方法 FZ/T 80002 服装标志、包装、运输和贮存 FZ/T 80004 服装成品出厂检验规则 FZ/T 80007.1 使用粘合衬服装剥离强力测试方法 FZ/T 80007.3 使用粘合衬服装耐干洗测试方法 男女单、棉服装、男女儿童单服装外观疵点样照 3 要求 3.1 使用说明 使用说明按GB/T 5296.4和GB 31701规定。 3.2 号型规格 3.2.1 号型设置按GB/T 1335规定。 3.2.2 主要部位规格按GB/T 1335的有关规定自行设计。 3.3 原材料 3.3.1 面料 按有关纺织面料标准选用符合本标准质量要求的面料。 3.3.2 里料 采用与所用面料相适宜并符合本标准质量要求的里料。 3.3.3 辅料 3.3.3.1 衬布、垫肩、装饰花边、袋布 采用与所用面料、里料的性能、色泽相适宜的衬布、垫肩、装饰花边、袋布，其质量应符合本标准规定。 3.3.3.2 缝线、绳带、松紧带 采用与所用面料、里料、辅料的性能相适宜的缝线、绳带、松紧带(装饰线、装饰带除外)。 3.3.3.3 钮扣、拉链及其他附件 采用适合所用面料的钮扣(装饰扣除外)、拉链及其他附件。钮扣、装饰扣、拉链及其他附件应表面光洁、无毛刺、无缺损、无残疵、无可触及锐利尖端和锐利边缘。拉链啮合良好、顺滑流畅。 注：可触及锐利尖端和锐利边缘是指在正常穿着条件下，成品上可能对人体皮肤造成伤害的锐利尖端和边缘。 3.4 经纬纱向 3.4.1 领面、后身、袖子允许的纱线歪斜程度不大于3％，前身底边不倒翘。 3.4.2 色织格料纬斜不大于3％。 3.5 对条对格 3.5.1 面料有明显条格在1.0 cm及以上的按表1规定。 表1 单位为厘米 部位名称 对条、对格规定 备注 左右前身 条料顺直，格料对横，互差不大于0.3 遇格子大小不一时，以衣长二分之一上部为主 袋与前身 条料对条，格料对格，互差不大于0.3。斜料贴袋左右对称，互差不大于0.5(阴阳条格例外) 遇格子大小不一时，以袋前部为主 领尖、驳头 条料对称，互差不大于0.2 遇有阴阳格.以明显条格为主 袖子 条料顺直，格料对横，以袖山为准，两袖对称，互差不大于0.8 — 背缝 条料对条，格料对横，互差不大于0.3 — 摆缝 格料对横，袖窿以下10.0处，互差不大于0.4 — 注：特别设计除外。 3.5.2 面料有明显条、格在0.5 cm～1.0 cm间，袋与前身条料对条，格料对格，互差不大于0.2 cm。 3.5.3 倒顺毛、阴阳格原料，全身顺向一致。 3.5.4 特殊图案面料以主图为准，全身顺向一致。 3.6 色差 3.6.1 领子、驳头、前披肩与前身的色差高于4级，其他表面部位的色差不低于4级。 3.6.2 里料的色差不低于3-4级。 3.7 外观疵点 成品各部位的疵点允许存在程度按表2规定。成品各部位划分见图1。各部位只允许一种允许存在程度内的疵点。未列入本标准的疵点按其形态，参照表中相似疵点规定。 表2 单位为厘米 疵点名称 程度 各部位允许存在程度 1号部位 2号部位 3号部位 线状疵点 轻微 不允许 2.0及以下 3.0及以下 明显 不允许 不允许 2.0及以下 条状疵点 轻微 不允许 允许一处 允许两处 明显 不允许 不允许 允许一处 块状疵点 轻微 不允许 0.5及以下 1.0及以下 明显 不允许 不允许 0.5及以下 纬档 轻微 不允许 允许一处 允许两处 明显 不允许 不允许 允许一处 压痕折皱 轻微 不允许 5.0及以下 10.0及以下 明显 不允许 不允许 5.0及以下 油、锈、色斑疵 轻微 不允许 0.2及以下 0.3及以下 明显 不允许 不允许 不允许 破损性疵点 不允许 注1：疵点程度描述： ——轻微：疵点在直观上不明显，通过仔细辨认才可看出。 ——明显：不影响总体效果，但能明显感觉到疵点的存在。 注2：表中线状疵点和条块状疵点的允许值是指同一件产品上同类疵点的累计尺寸。 注3：特殊设计或装饰除外。 图1 3.8 缝制 3.8.1 针距密度按表3规定。 表3 项目 针距密度 备注 明暗线 不少于12针/3 cm 特殊需要除外 包缝线 不少于11针/3 cm — 手工针 不少于7针/3 cm 肩缝、袖窿、领子不少于9针/3 cm 三角针 不少于5针/3 cm 以单面计算 锁眼 细线 不少于12针/1 cm — 粗线 不少于9针/1 cm — 注：细线指20 tex及以下缝纫线；粗线指20 tex以上缝纫线。 3.8.2 各部位的缝份不小于0.8 cm(领、袋、门襟、止口等特殊部位除外)；缝纫线迹顺直，整齐、平服、牢固；上下线松紧适宜，无跳线，断线，起止针处回针牢固。 3.8.3 领子平服，不反翘，领子部位明线不允许有接线。 3.8.4 绱袖网顺，两袖前后基本一致。袋与袋盖方正、圆顺。 3.8.5 锁眼定位准确，大小适宜，扣与眼对位，整齐牢固。眼位不偏斜，锁眼针迹美观、整齐、平服。 3.8.6 钉扣牢固，扣脚高低适宜，线结不外露。钉扣不应钉在单层布上(装饰扣除外)，绕脚高度与扣眼厚度相适宜，缠绕3次以上(装饰扣不缠绕)，收线打结应结实完整。 3.8.7 四合扣上、下扣松紧适宜，牢固，不脱落；扣与扣眼及四合扣上下应对位。 3.8.8 绱拉链缉线顺直，拉链带平服，左右高低一致。 3.8.9 对称部位基本一致。 3.8.10 领子部位不允许跳针，其余部位30 cm内不得有连续跳针或一处以上单跳针，链式线迹不允许跳线。 3.8.11 商标和耐久性标签位置端正、平服。 3.9 规格尺寸允许偏差 成品主要部位规格尺寸允许偏差按表4规定。 表4 单位为厘米 部位名称 规格尺寸允许偏差 领大 ±1.0 衣长 ±1.0 胸围 ±2.0 总肩宽 ±0.8 长袖袖长 圆袖 ±0.8 连肩袖 ±1.2 短袖袖长 ±0.6 3.10 整烫 3.10.1 各部位熨烫平服，整洁，无烫黄、水渍及亮光。 3.10.2 使用粘合衬部位不允许有脱胶、渗胶、起皱及起泡。各部位表面不允许有沾胶。 3.11 理化性能 成品的理化性能要求按表5规定。其中，3岁以上至14岁儿童穿着服装的安全性能还应同时符合GB 31701的规定。 表5 项目 分等要求 优等品 一等品 合格品 纤维含量/％ 按GB/T 29862规定 甲醛含量/(mg/kg) 按GB 18401规定 pH值 异味 可分解致癌芳香胺染料/(mg/kg) 尺寸变化率/％ ≥ 水洗b 领大a －1.0 －1.5 衣长 －1.5 －2.5 －3.5 胸围 －1.5 －2.0 －2.5 干洗b 领大a －1.5 衣长 －2.0 胸围 －2.0 面料色牢度/级 ≥ 耐皂洗b 变色 4 3-4 3 沾色 4 3-4 3 耐水 变色 4 3-4 3 沾色 4 3-4 3 耐干洗b 变色 4-5 4 3-4 沾色 4-5 4 3-4 耐摩擦 干摩擦 4 3 4 3 湿摩擦c 3-4 3 3 耐汗渍 变色 4 3-4 3 沾色 4 3-4 3 耐光 变色 4 4(浅色3) 3 拼接互染d 沾色 4 里料色牢度/级 ≥ 耐皂洗b 沾色 3 耐水 变色 3 沾色 3 耐汗渍 变色 3 沾色 3 耐干摩擦 3-4 装饰件和绣花线耐皂洗b/级 变色 3-4 ≥ 沾色 3-4 装饰件和绣花线耐干洗b/级 变色 3-4 ≥ 沾色 3-4 面料起球/级 ≥ 4 3-4 3 接缝性能e 缝子纰裂程度≤0.6 cm 撕破强力/N 按GB/T 21295规定 覆粘合衬剥离强力f/N ≥ 6 洗涤后外观b 洗涤干燥后外观平整度 (特殊设计除外)/级 ≥ 3 不考核 洗涤干燥后接缝外观平整度 (特殊设计除外)/级 ≥ 4 3 变色/级 ≥ 4 洗涤后外观质量 样品经洗涤(包括水洗、干洗)后应符合GB/T 21295—2014表13中外观质量的规定 注：按GB/T 4841.3规定，颜色深于1/12染料染色标准深度为深色，颜色不深于1/12染料染色标准深度为浅色。 a 只考核关门领。 b 水洗尺寸变化率、耐皂洗色牢度和水洗后外观不考核使用说明中标注不可水洗的产品；干洗尺寸变化率、耐干洗色牢度和干洗后外观不考核使用说明中标注不可干洗的产品。 c 具有起绒、植绒、磨毛等风格面料、深色面料的耐湿摩擦色牢度的合格品指标允许比本标准降半级。 d 拼接互染色牢度只考核深、浅颜色拼接的产品。不考核使用说明中标注不可水洗的产品。 e 轻薄类丝绸产品、缕空、烂花类织物不考核，但宜在产品使用说明中明示相关注意事项的警示用语。纰裂试验结果出现纱线滑脱、织物撕破或缝线断裂现象判定接缝性能不符合要求。 f 仅考核领子和大身部位。复合、喷涂面料、丝绒、粗纺面料的覆粘合衬部位不考核。非织造布粘合衬如在剥离强力试验中无法剥离，则不考核此项目。 4 检验方法 4.1 检验工具 4.1.1 钢卷尺或直尺，分度值为1 mm。 4.1.2 评定变色用灰色样卡(GB/T 250)。 4.1.3 1/12染料染色标准深度色卡(GB/T 4841.3)。 4.1.4 男女单、棉服装、男女儿童单服装外观疵点样照。 4.2 规格测定 主要部位规格尺寸测量方法按GB/T 31907规定，规格尺寸允许偏差按表4规定。 4.3 外观测定 4.3.1 外观检验一般采用灯光照明，照度不低于600 lx，有条件时也可采用北空光照明。 4.3.2 测定色差程度时，被测部位应纱向一致，采用北空光照射，或用600 lx及以上的等效光源。入射光与被测物约成45°角，观察方向应垂直于被测物表面，距离60 cm目测，与GB/T 250样卡对比。 4.3.3 外观疵点允许存在程度按3.7规定，距离60 cm目测，必要时采用钢卷尺或直尺进行测量，并与男女单、棉服装、男女儿童单服装外观疵点样照对比。 4.3.4 针距密度在成品缝纫线迹上任取3 cm测量(厚薄部位除外)。 4.3.5 经、纬向纱线歪斜程度测定按GB/T 14801规定，按式(1)计算结果。 S＝1 00 d/W (1) 式中： S——经向或纬向纱线歪斜程度，％； d——经纱或纬纱与直尺问最大垂直距离，单位为毫米(mm)； W——测量部位宽度，单位为毫米(mm)。 4.4 理化性能测定 4.4.1 儿童服装安全性能按GB 3170l规定测试。 4.4.2 水洗尺寸变化率按GB/T 8630规定测试，采用GB/T 8629—2017，A型标准洗衣机，洗涤程序4N(面料含毛或蚕丝≥50％的成品采用4G程序)，明示手洗的采用洗涤程序4H，干燥方法采用程序A。干洗尺寸变化率按FZ/T 80007.3规定测试，采用常规干洗法，并在批量中随机抽取3件成品测试，结果取3件的平均值。 4.4.3 耐皂洗色牢度按GB/T 3921—2008中的方法A(1)规定测试。 4.4.4 耐干洗色牢度按GB/T 5711规定测试。 4.4.5 耐光色牢度按GB/T 8427—2019规定测试，其中曝晒按方法3，晒至第一阶段。 4.4.6 拼接互染色牢度按GB/T 31127—2014方法A规定测试。 4.4.7 起球按GB/T 4802.1—2008规定测试(其中磨毛织物、仿毛织物、精梳毛织品按方法E，松结构精梳毛织品、粗梳毛织品按方法F，其余按方法D)。 4.4.8 撕破强力按GB/T 3917.2规定测试。 4.4.9 覆粘合衬剥离强力按FZ/T 80007.1规定测试。 4.4.10 洗涤后外观测试方法，样品经4.4.2规定进行洗涤、干燥后，在4.3规定的外观测试条件下，结合表5要求，按GB/T 21294中的评定方式评定。 4.4.11 附件尖端和边缘的锐利性按GB/T 31702规定测试。 4.4.12 其他理化性能项目按GB/T 21294规定测试。其中耐皂洗、耐干洗、耐汗渍、耐水色牢度仲裁试验选择单纤维贴衬。缝子纰裂程度的批量产品检验结果按GB/T 21294规定取平均值，单件产品取实测值。 4.4.13 未提及取样部位的测试项目，可按测试需要在成品上选取试样。