Implementation rules for compulsory product certification -
Electronic products and safety accessories
0 Introduction
The Rules is developed based on the safety risks and certification risks of electronic products and safety accessories, and it specifies the basic principles and requirements for implementation of compulsory product certification for electronic products and safety accessories.
The Rules shall be used in conjunction with the general implementation rules issued by the Certification and Accreditation Administration of the People's Republic of China (CNCA), such as Implementation rules for compulsory product certification - Classified management and certification modes selection and determination for production enterprises, Implementation rules for compulsory product certification - Utilization of testing resources and other certification results of production enterprises, and Implementation rules for compulsory product certification - General requirements for factory inspection.
The certification body shall, in accordance with the requirements of general implementation rules and the Rules, prepare detailed rules for implementation of certification, which shall be implemented together with the general implementation rules and the Rules.
The production enterprise shall ensure the continued compliance of its certified products with the requirements of the certification and applicable standards.
1 Application scope
The Rules is applicable to electronic products and safety accessories listed in the catalogue of products subject to compulsory certification. Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the document issued by the Certification and Accreditation Administration of the People’s Republic of China (CNCA).
2 Certification standards
S.N. Product category Certification standards
Safety standards Electromagnetic compatibility standards
1 Color TV receivers and TV set-top boxes of various imaging modes GB 4943.1 GB/T 9254.1
GB 17625.1
2 Microcomputer
3 Portable computer
4 Display equipment used by connecting to computers
5 Printing equipment used by connecting to computers
6 Multipurpose print copiers
7 Scanners
8 Servers
9 Fax machines GB 4943.1 GB/T 9254.1
10 Mobile user terminal GB 4943.1 GB/T 19484.1
GB/T 22450.1
YD/T 1592.1
YD/T 1595.1
YD/T 2583.14
YD/T 2583.18
11 Power source GB 4943.1 GB/T 9254.1
GB 17625.1
12 Portable power source GB 4943.1
GB 31241 /
13 Lithium-ion battery and battery pack GB 31241 /
For the above standards, in principle, the latest editions issued by the national standardization administrative department shall apply. Any other edition of the standards, if need to be used, shall be subject to the document issued by the Certification and Accreditation Administration of the People’s Republic of China (CNCA).
0 Introduction
1 Application scope
2 Certification standards
3 Certification mode
4 Division of certification units
4.1 General requirements
4.2 Special requirements
4.3 Other requirements
5 Certification application
5.1 Proposing and acceptance of certification application
5.2 Certification application data
5.3 Implementation arrangements
6 Implementation of certification
6.1 Type test
6.2 Certification evaluation and decision
6.3 Certification time limit
7 Post-certification supervision
7.1 Post-certification follow-up inspection
7.2 Sampling testing or inspection on production site
7.3 Market sampling testing or inspection
7.4 Frequency and time of post-certification supervision
7.5 Record of post-certification supervision
7.6 Evaluation of post-certification supervision result
8 Certification certificate
8.1 Maintenance of certification certificate
8.2 Changes in products covered by certification certificate
8.3 Extension of products covered by certification certificate
8.4 Cancellation, suspension and revocation of certification certificate
8.5 Use of certification certificate
9 Certification mark
9.1 Style of certification mark permitted to use
9.2 Use of variant certification mark
10 Charging
11 Certification responsibilities
12 Detailed rules for implementation of certification
