Requirements and measurement methods of electromagnetic compatibility for 800 MHz/2 GHz cdma2000 digital cellular mobile telecommunications system— Part 1:User equipment and ancillary equipment
1 Scope
This part of GB/T 19484 specifies the requirements of electromagnetic compatibility for user equipment (UE) and ancillary equipment of 800 MHz/2 GHz CDMA 2000 digital cellular mobile telecommunications system, including measurement methods, limit value, performance criteria, etc.
This part is applicable to CDMA, CDMA 1X, CDMA 2000 and CDMA 2000 HRPD customer premises equipment sending and receiving voice and/or data, including portable and on-board user equipment, as well as user equipment and the like powered by AC power supply and used at fixed position.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6113.104-2008 Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 1-4: Radio Disturbance and Immunity Measuring Apparatus - Ancillary Equipment - Radiated Disturbances
GB 9254-2008 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement
GB 17625.1-2012 Electromagnetic Compatibility – Limits - Limits for Harmonic Current Emissions(Equipment Input Current ≤16 A per Phase)
GB 17625.2-2007 Electromagnetic Compatibility (EMC) – Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-voltage Supply Systems, for Equipment with Rated Current ≤16 A per Phase and Not Subject to Conditional Connection
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test
GB/T 17626.6-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-frequency Fields
GB/T 17626.8-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test
GB/T 17626.29-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Voltage Dips Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests
GB/T 21437.2-2008 Road Vehicles - Electrical Disturbances from Conduction and Coupling - Part 2: Electrical Transient Conduction along Supply Lines Only
GB/T 22451-2008 Common Requirements of Electromagnetic Compatibility for Radio Communication Equipment
YD/T 1483-2006 Technical Requirement and Measurement Method of Spurious Emission of Radio Equipment
YD/T 1484-2011 Measurement Method for Radiated RF Power and Receiver Performance of User Equipment
IEC 61000-4-11 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measuring Techniques - Section 11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
data application ancillary
ancillary equipment providing data access (sending and receiving) service between user equipment and server
3.1.2
forward CDMA channel
communication channel from base station to user equipment
3.1.3
Foreword i
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
4 Test Conditions
5 Performance Assessment Method
6 Performance Criteria
7 Applicability
8 Disturbance Measurement Methods and Limits
9 Test Methods and Grades of Immunity
