标准编号:	JC/T 932-2013
中文名称:	卫生洁具排水配件
英文名称:	Drainage fittings for sanitary wares
中标分类:	Q31    建筑卫生陶瓷
行业分类:	JC    建筑材料行业标准
发布机构:	中华人民共和国工业和信息化部
发布日期:	2013-4-25
实施日期:	2013-9-1
标准状态:	valid
替代旧标准:	JC/T 932-2003 卫生洁具排水配件
翻译语言:	英文
文件格式:	PDF
中文字符数:	16000 字
翻译价格(元):	400.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies the terms and definitions, materials, technical requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of drainage fittings for sanitary wares (hereinafter referred to as “waste fitting”). This standard is applicable to the waste fitting on such products as wash basin, washing tank, bath tube, bidet, shower room and urinal, connected to gravity drainage pipe. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 197-2003 General purpose metric screw threads—Tolerances GB/T 1176 Specification for cast copper alloys GB/T 1527 Drawn tube of copper and copper alloys GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 6461-2002 Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads GB/T 10125-1997 Corrosion tests in artificial atmospheres - Salt spray tests GB/T 12670 Polypropylene (PP) resin GB/T 12671 Polystyrene (PS) resin GB/T 12672 Acrylonitrile-butadiene-styrene (ABS) resin GB/T 20878 Stainless and heat-resisting steels - Designation and chemical composition GB/T 21873 Rubber seals - Joint rings for water supply drainage and sewerage pipelines - Specification for materials HG/T 3097 Rubber seals - Joint rings for pipelines for hot-water supply up to 110℃ - Specification for the materials

1 Scope 2 Normative references 3 Terms and definitions 4 Materials 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking, packaging, transportation and storage Annex A (Normative) Connection dimensions of waste fitting Annex B (Normative) Dimensions of flow test etalon of waste fitting