1 Scope
This standard specifies terms and definitions, product classification, requirements, test methods, inspection rules, marking, instruction, packaging, transport and storage of bamboo furniture.
This standard is applicable to general technical requirements of bamboo furniture; for bamboo part of other furniture, this standard may also apply by reference.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Colour Fastness - Grey Scale for Assessing Change in Colour
GB/T 1043.1 Plastics - Determination of Charpy Impact Properties - Part 1: Non-instrumented Impact Test
GB/T 1732 Determination of Impact Resistance of Film
GB/T 1931 Method for Determination of the Moisture Content of Wood
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3324 Wooden Furniture - General Technical Requirements
GB/T 3920 Textiles - Tests for Colour Fastness - Colour Fastness to Rubbing
GB/T 3921 Textiles - Tests for Colour Fastness - Colour Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles - Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 4689.20 Leather - Determination for Adhesion of Finish
GB/T 4893.1 Furniture - Assessment of Surface Resistance to Cold Liquids
GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat
GB/T 4893.3 Furniture - Assessment of Surface Resistance to Dry Heat
GB/T 4893.4 Test of Surface Coatings of Furniture - Part 4: Determination of Adhesion - Cross Cut
GB/T 4893.7 Test of Surface Coatings of Furniture - Part 7: Determination of Surface Resistance to Alternation of Heat and Cold
GB/T 4893.8 Test of Surface Coatings of Furniture - Part 8:Determination of Wearability
GB/T 4893.9 Test of Surface Coatings of Furniture - Part 9: Determination of Resistance to Impact
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB 6566-2010 Limits of Radionuclides in Building Materials
GB/T 6669 Flexible Cellular Polymeric Materials - Determination of Compression Set
GB/T 6670 Flexible Cellular Polymeric Materials - Determination of Resilience by Ball Rebound
GB/T 6739-2006 Paints and Varnishes - Determination of Film Hardness by Pencil Test
GB/T 7573 Textiles - Determination of pH of Aqueous Extract
GB/T 9286 Paints and Varnishes-Cross Cut Test for Films
GB/T 9754 Paints and Varnishes - Determination of Specular Gloss of Non-metallic Paint Films at 20° 60°and 85°
GB/T 10357.1 Test of Mechanical Properties of Furniture - Part 1: Strength and Durability of Tables
GB/T 10357.2 Test of Mechanical Properties of Furniture - Part 2: Stability of Chairs and Stools
GB/T 10357.3 Test of Mechanical Properties of Furniture - Part 3: Strength and Durability of Chairs and Stools
GB/T 10357.4 Test of Mechanical Properties of Furniture - Part 4: Stability of Storage Units
GB/T 10357.5 Test of Mechanical Properties of Furniture - Part 5: Strength and Durability of Storage Units
GB/T 10357.6 Test of Mechanical Properties of Furniture - Part 6: Strength and Durability of Beds
GB/T 10357.7 Test of Mechanical Properties of Furniture - Part 7: Stability of Tables
... ...
... ...
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 28202-2011 and the following apply.
3.1
bamboo-culm
round and hollow bamboo pole with joint after being felled with root cut and shoots removed
3.2
bamboo-based panel
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Instruction, Packaging, Transport and Storage
Annex A (Normative) Mechanical Property Test Level
Annex B (Informative) Physical and Mechanical Properties of Bamboo materials, Wood and Artificial panels and Determination Method
Annex C (Informative) Annual Average Equilibrium Moisture Content of Woods in Various Regions of China
Bibliography