1 Scope
This Part specifies the apparatus, instruments, test preparation and each test methods used for testing the electrical machines and controllers for electric vehicles.
This Part applies to the electrical machines and controllers for electric vehicles.
2 Normative References
The following standards contain provisions which, through reference in this Part of GB/T 18488, constitute provisions of this Part. For dated references, subsequent amendments (excluding corrections to) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents apply. For undated references, the latest editions of the normative documents are applicable to this Part.
GB 755-2000 Rotating Electrical Machines-Rating and Performance (idt IEC 60034-1:1996)
GB/T 1029-2005 Test Procedures for Three-phase Synchronous Machines (IEC 60034-2: 1972)
GB/T 1032-2005 Test Procedure for Three-phase Induction Motors
GB/T 2423.17-1993 Basic Environmental Testing Procedures for Electric and Electronic Products Test Ka: Salt Mist (eqv IEC 60068-2-11: 1981)
GB/T 3859.1-1993 Semiconductor Convertors-Specification of Basic Requirements (eqv IEC 60146-1-1: 1991)
GB/T 4942.1-2006 Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code)- Classification (IEC 60034-5: 2000, IDT)
GB/T 4942.2-1993 Degrees of Protection Provided by Enclosures for Low-voltage Apparatus (eqv. IEC 60947-1:1988)
GB/T 10068-2000 Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher-Measurement, Evaluation and Limits of Vibration (idt IEC 60034-14: 1996)
GB/T 10069.1-2006 Measurement of Airborne Noise Emitted by Rotating Electrical Machines and the Noise Limits-Part 1: Method for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines (ISO 1608: 1999, MOD)
GB/T 12665-1990 Requirements of Damp-heat Testing of Electrical Machine for Service in General Environmental Condition
GB/T 13422-1992 Power Semiconductor Converters-Electrical Test Methods
GB/T 14023-2006 Vehicles Boats and Internal Combustion Engine Driven Devices-Radio Disturbance Characteristics-Limits and Methods of Measurement (CSPR 12: 2005, IDT)
GB 14711-2006 Safety Requirements of Small and Medium Size Rotating Electrical Machines (neq IEC 60034-1)
GB/T 17619-1998 Limits and Methods of Testing for Immunity of Electrical/Electronic Sub-assemblies in Vehicles to Electromagnetic Radiation
JB/T 9615.1-2000 Test Methods of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
JB/T 9615.2-2000 Test Limits of the Interturn Insulation on Random Wound Winding for AC Low-voltage Machines
3 Test Preparation
Contents
Foreword I
1 Scope
2 Normative References
3 Test Preparation
4 General Test Items
5 Environmental Test
6 Temperature Rise Test
7 Characteristics and Efficiency Testing for Electrical Machine Torque
8 Regenerated Energy Feedback Test
9 Electromagnetic Compatibility Testing
