1 Scope
This standard specifies terms and definitions, classification, requirements, inspection methods, inspection rules as well as marking, packaging, transportation and storage of laminate flooring.
This standard is applicable to laminate flooring.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 2828.1-2003/ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 15102-2006 Surface decorated wood-based panels with paper impregnated thermosetting resins
GB/T 17657-1999 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB 18580-2001 Indoor decorating and refurbishing materials - Limit of formaldehyde emission of woodbased panels and finishing products
JB/T 3889-1994 Abrasive sheets
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
laminate flooring
flooring formed by the simultaneous action of heat and pressure, with a surface layer consisting of one or more layers of special papers, impregnated with thermosetting amino resin and bonded on a substrate such as such as particleboard, high density fibreboard and other wood-based panels, usually finished with a backing used as a balancing layer and a finishing used as wearing layer, with a trade mark name of reinforced wood floor
3.2
frosting mark
frosting mark, also called white mark, is opaque white spot on the surface of the product
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
7 Inspection rules
8 Marking, packaging, transportation and storage
