DB31/933-2015 Integrated emission standards of air pollutants- Shanghai
Integrated emission standards of air pollutants
1 Application scope
This standard specifies the requirements for emission control, monitoring, supervision and implementation of air pollutants from stationary sources.
This standard is applicable to the air pollutant emission management of existing pollution sources, as well as the environmental impact assessment, environmental protection facility design, completion acceptance of new, reconstructed and expanded projects and the air pollutant emission management after they are put into production.
This standard is applicable to the legal pollutant emission behaviors. The management of the location of newly established pollution sources and of the existing pollution sources in special protection areas shall be implemented in accordance with the relevant provisions of laws, regulations and rules such as Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution, Law of the People's Republic of China on Prevention and Control of Water Pollution, Law of the People's Republic of China on Maritime Environmental Protection, Law of the People's Republic of China on the Prevention and Control of Environmental Pollution Caused by Solid Waste, Law of the People's Republic of China on Environmental Impact Assessment, Regulations of Shanghai Municipality on Environmental Protection and Regulations of Shanghai Municipality on Environmental Protection.
2 Normative references
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For undated references, the latest edition applies.
GB 3095 Ambient air quality standard
GB/T 8017 Standard test method for vapor pressure of petroleum products (Reid method)
GB 9801 Air quality - Determination of carbon monoxide - Non-dispersive infrared spectrometry
GB/T 15501 Air quality - Determination of nitrobenzene (mononitro- and dinitro-compound) - Reduction by zinc-N-(1-naphthyl) ethylene diamine dihydrochloride spectrophotometric method
GB/T 15502 Air quality - Determination of aniline - N-(1-naphthyl) ethylene diamine dihydrochloride spectrophotometric method
GB/T 15516 Air quality - Determination of formaldehyde - Acetylacetone spectrophotometric method
GB/T 15432 Ambient air - Determination of total suspended particulates - Gravimetric method
GB/T 1543 Air quality - Determination of benz[a]pyrene in ambient air - High performance liquid chromatography
GB/T 16157 Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GBZ 2 Occupational exposure limits for hazardous agents in the workplace
HJ/T 65 Stationary source emission - Determination of tin - Graphite furnace atomic absorption spectrophotometric method
HJ/T 67 Stationary source emission - Determination of fluoride - Ion selective electrode method
HJ/T 68 Stationary source emission - Determination of exhauster anilines - Gas chromatography
HJ/T 75 Specifications for continuous emissions monitoring of flue gas emitted from stationary sources (on trial)
HJ 77.2 Ambient air and flue gas - Determination of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) - Isotope dilution HRGC-HRMS
HJ/T 194 Technical specifications on manual methods for ambient air quality monitoring
HJ/T 373 Technical specifications of quality assurance and quality control for monitoring of stationary pollution source (on trial)
HJ/T 397 Technical specifications for emission monitoring of stationary source
HJ/T 398 Stationary source emission - Determination of blackness of smoke plumes - Ringelmann smoke chart
HJ 479 Ambient air - Determination of nitrogen oxides-N-(1-naphthyl) ethylene diamine dihydrochloride spectrophotometric method
HJ 480 Ambient air - Determination of the fluoride - Method by filter sampling and fluorine ion-selective electrode analysis
HJ 482 Ambient air - Determination of sulfur dioxide - Formaldehyde absorbing-pararosaniline spectrophotometry
HJ 539 Ambient air - Determination of lead - Graphite furnace atomic absorption spectrometry (Tentative)
HJ 540 Ambient air and waste gas - Determination of arsenic - Silver diethyldithiocarbamate spectrophotometric method (Tentative)
HJ 542
Ambient air - Determination of mercury and its compounds - Cold atomic fluorescent spectrophotometry after sulfhydryl cotton preconcentraction (Tentative)
HJ 638 Ambient air - Determination of phenolic compounds by high performance liquid chromatography
Foreword i 1 Application scope 2 Normative references 3 Terms and definitions 4 Requirements for air pollutant emission control 5 Monitoring requirements 6 Implementation and supervision of standard Annex A (Normative) List of air pollutants from stationary sources and organized emission limits Annex B (Normative) Calculation method of parameters relevant to equivalent stacks Annex C (Normative) Technical requirements for setting monitoring sites of stationary pollution source emission Annex D (Informative) Basic requirements for enterprises to establish pollutant emission and control accounts Annex E (Normative) Stationary source emission - Determination of benzene homologues - Bags sampling-gas chromatography Annex F (Normative) Calculation equation of toxic equivalent quantity (TEQ) of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) as well as polychlorinated biphenyl in the emission Annex G (Normative) Stationary source emission - Determination of chlorobenzenes - Bags sampling-gas chromatography Annex H (Normative) Ambient air - Determination of chlorobenzenes - Sorbent adsorption and thermal desorption/gas chromatography