Technical Requirements for User Equipment of TD-LTE Digital Cellular Mobile Telecommunication Network (Phase 1)
1 Scope
This standard specifies the requirements for function and performance, power consumption, interface, reliability, electromagnetic compatibility, specific absorption rate, battery and charger, etc. of user equipment (UE) of TD-LTE digital cellular mobile telecommunication network in data services.
This standard is applicable to all user equipment of TD-LTE digital cellular mobile telecommunication network in Phase 1.
2 Normative References
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB 2312-1980 Code of Chinese Graphic Character Set for Information Interchange — Primary Set
GB 4943.1 Information Technology Equipment — Safety — Part 1: General Requirements
GB/T 18287 General Specification of Lithium-Ion Cells and Batteries for Mobile Phone
GB/T 18288 General Specification of Nickel-Metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-Cadmium Battery for Cellular Phone
YD 1268.1 The Safety Specification and Test Method for Lithium Batteries
YD 1268.2 The Safety Specification and Test Method for Lithium Chargers
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1591 Technical Requirements and Test Method for Power Adapter and Charging/Data Port of Mobile Telecommunication Terminal Equipment
YD/T 2558-2013 Technical Requirement for Safety of LTE Terminal and Network Equipment Based on ZUC
YD/T 2560-2013 TD-LTE Digital Cellular Mobile Communication Network — Uu Interface Physical Layer Technical Requirement (Phase 1) (All Parts)
YD/T 2561-2013 TD-LTE Digital Cellular Mobile Telecommunication Network Technical Requirement for Uu Interface Layer Two (Phase 1)
YD/T 2562-2013 TD-LTE Digital Cellular Mobile Telecommunication Network Technical Requirement for Uu Interface Layer Three (Phase 1) (All Parts)
YD/T 2581-2013 LTE Digital Cellular Mobile Telecommunication Network Technical Requirements for UICC-ME(Cu)Interface (All Parts)
YD/T 2583.14 Requirements and Measurement Methods of Electromagnetic Compatibility for Cellular Mobile Telecommunications Equipment — Part 14: LTE User Equipment and Ancillary Equipment
3GPP TS 24.301 Non-Access-Stratum (NAS) Protocol for Evolved Packet System (EPS); Stage 3
3GPP TS 36.101 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Radio Transmission and Reception
3GPP TS 36.201 Evolved Universal Terrestrial Radio Access (E-UTRA); LTE Physical Layer; General Description
3GPP TS 36.211 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Channels and Modulation
3GPP TS 36.212 Evolved Universal Terrestrial Radio Access (E-UTRA); Multiplexing and Channel Coding
3GPP TS 36.213 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer Procedures
3GPP TS 36.214 Evolved Universal Terrestrial Radio Access (E-UTRA); Physical Layer; Measurements
3GPP TS 36.300 Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall Description; Stage 2
3GPP TS 36.302 Evolved Universal Terrestrial Radio Access (E-UTRA); Services Provided by the Physical Layer
3GPP TS 36.304 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Procedures in Idle Mode
3GPP TS 36.306 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) Radio Access Capabilities
3GPP TS 36.321 Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access Control (MAC) Protocol Specification
3GPP TS 36.322 Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Link Control (RLC) Protocol Specification
3GPP TS 36.323 Evolved Universal Terrestrial Radio Access (E-UTRA); Packet Data Convergence Protocol (PDCP) Specification
3GPP TS 36.331 Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol Specification
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
For the purposes of this standard, the following term and definition apply.
3.1.1
Terminal Equipment
whole equipment interacting with the radio access subsystem, which is identical to UE, unless otherwise stated
3.2 Abbreviations
For the purposes of this standard, the following abbreviations apply.
... ...
... ...
4 Overview
Figure 1 Logical Structure Diagram of TD-LTE Terminal Equipment
TD-LTE terminal equipment, also known as user equipment (UE), may be classified into various types based on their purposes and functions. The terminal shall provide corresponding compatibility interfaces according to the different connected equipment, such as the air interface and USB interface between the TD-LTE terminal and the TD-LTE network equipment. Terminal equipment shall include ME capable of sending and receiving wireless signals, baseband processing and running high-level applications, and a detachable smart card USIM capable of saving data, programs and secure identification. ME and USIM shall be connected by standard Cu interface. ME can be further divided into smaller unit equipment logically, i.e. the MT responsible for wireless reception and transmission and related functions and the TE responsible for running end-to-end high-level applications. The MT and the TE can be connected through various physical means (wired or wireless).
In the TD-LTE logical structure diagram shown in Figure 2, the TE is connected to the base station equipment system through the TD-LTE air interface (Uu interface), and communicates with the core network (CN) through the base station equipment system, thereby completing the entire end-to-end service connection.
Figure 2 The Position of the UE in the Logical Structure of the TD-LTE System
LTE Phase 1 terminals may follow 3GPP R8 or R9 versions in terms of the version of air interface protocol stack. The R8 version terminal mentioned in the subsequent text refers to the LTE terminal that follows the 3GPP R8 version protocol stack; the R9 version terminal refers to the LTE terminal that follows the 3GPP R9 version protocol stack.
5 UE Classification and Power Class
5.1 Classification of UE
According to the size and application range of terminals, UE can be roughly classified as follows:
——Handheld station: equipment of small size and suitable for hand-held, capable of independently supporting TD-LTE packet domain bearer services;
——Data card: equipment that cannot be used independently and needs to be connected to other equipment such as laptops or PDAs to support TD-LTE packet domain bearer services;
——Other UE: equipment not included in the above types that can be used independently or in combination with other equipment and support TD-LTE packet domain bearer services.
5.2 Power Class of UE
The power class of the UE is defined in terms of maximum power output. There is only one class for UE based on the power class, as shown in Table 1.
Foreword II
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Overview
5 UE Classification and Power Class
5.1 Classification of UE
5.2 Power Class of UE
5.3 UE Transmission Capability Level
6 Bearer Service
7 Functions of UE
7.1 Basic Functions of UE Human-Machine Interface
7.2 Functional Requirements on Physical Layer
7.3 Function of Layer
7.4 Functions of Layer 3 and NAS Layer
8 UE Performance
8.1 Channel Division
8.2 Transmitter Index
8.3 Receiver Index
8.4 Performance Requirements
8.5 Reporting of Channel State Information
8.6 Performance Requirements for Radio Resource Management
9 Power Consumption Requirements
10 Interface Requirements
10.1 Requirements for Uu Interface
10.2 Requirements for Cu (USIM-ME) Interface
11 Reliability Requirements
12 Electromagnetic Compatibility Requirements
13 Requirements for Specific Absorption Rate (SAR)
14 Requirements for Battery and Charger
14.1 Battery Performance
14.2 Requirements for Charger
15 Requirements for Appearance, Packaging and Assembly
