标准编号:	YD/T 1214-2006
中文名称:	900/1800MHz TDMA数字蜂窝移动通信网通用分组无线业务(GPRS)设备技术要求:移动台
英文名称:	Technical requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS)Equipment:Mobile Stations
中标分类:	M37    移动通信设备
行业分类:	YD    通信行业标准
发布机构:	信息工业部
发布日期:	2006-6-8
实施日期:	2006-10-1
标准状态:	valid
替代旧标准:	YD/T 1214-2002 900/1800MHz TDMA数字蜂窝移动通信网通用分组无线业务(GPRS)设备技术要求:移动台
翻译语言:	英文
文件格式:	PDF
中文字符数:	20000 字
翻译价格(元):	1500.0
交付时间:	付款后 1 个工作日

Technical Requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service (GPRS) Equipment: Mobile Stations 1 Scope This standard specifies the requirements of mobile stations (MS) supporting General Packet Radio Service (GPRS) in 900/1800 MHz TDMA digital cellular mobile telecommunication network in terms of service, function, performance, interface, electromagnetic compatibility and environmental adaptability. This standard is applicable to mobile stations (MS) supporting General Packet Radio Service (GPRS) and GSM mobile stations not supporting GPRS in 900/1800MHz TDMA digital cellular mobile telecommunication network; the technical requirements other than those related to General Packet Radio Service (GPRS) are applicable to GSM mobile stations that do not support GPRS. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 18287 General specification of lithium-ion battery for cellular phone GB/T 18288 General specification of nickel-metal hydride battery for cellular phone GB/T 18289 General specification of nickel-cadmium battery for cellular phone YD 1268 The safety specification and test method for lithium batteries and charger YD/T 965 Safety requirements and test method for user equipment Technical requirements and testing methods for reliability of mobile telecommunication handset Technical requirements and test methods for acoustics performance of digital mobile terminal YD/T 910.21 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface signalling part (Phase 2) YD/T 910.22 900/1800MHz TDMA digital cellular mobile telecommunication network radio interface physical layer part (Phase 2) YD 1032 Limits and measurement methods of electromagnetic compatibility for 900/1800 MHz TDMA digital cellular telecommunications system—Part 1: Mobile station and ancillary equipment ITU-T Recommendations I.240—ISDN service capability—Definition of telecommunication service 3GPP TS 01.61 GPRS ciphering algorithm requirements 3GPP TS 02.60/3 GPP TS 22.060 General Packet Radio Service (GPRS); Service description; Stage 1 3GPP TS 03.03/3 GPP TS 23.003 Numbering, Addressing and Identification 3GPP TS 03.60/3 GPP TS 23.060 General Packet Radio Service (GPRS); Service description; Stage 2 3GPP TS 03.64/3 GPP TS 43.064 General Packet Radio Service (GPRS); Overall description of the GPRS radio interface; Stage 2 3GPP TS 04.04/3 GPP TS 44.004 Layer 1: General Requirements 3GPP TS 04.05/3 GPP TS 44.005 Data Link (DL) Layer: General Requirements 3GPP TS 04.06/3 GPP TS 44.006 Mobile Station - Base Stations System (MS - BSS) Interface Data Link (DL) Layer Specification 3GPP TS 04.07/3 GPP TS 24.007 Mobile radio interface signalling layer 3: General Aspects 3GPP TS 04.08/3 GPPTS 24.008 Mobile radio interface Layer 3 specification 3GPP TS 04.22 Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface 3GPP TS 04.60/3 GPP TS 44.060 General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control/ Medium Access Control (RLC/MAC) protocol 3GPP TS 04.64/3 GPPTS 44.064 General Packet Radio Service (GPRS); Mobile Station - Serving GPRS Support Node (MS-SGSN) Logical Link Control (LLC) layer specification 3GPP TS 04.65/3 GPPTS4.065 General Packet Radio Service (GPRS); Mobile Station (MS) - Serving GPRS Support Node (SGSN); Subnetwork Dependent Convergence Protocol (SNDCP) 3GPP TS 05.01/3 GPPTS 45.001 Physical layer on the radio path; General description 3GPP TS 05.02/3 GPP TS 45.002 Multiplexing and Multiple Access on the Radio Path 3GPP TS 05.03/3 GPP TS 45.003 Channel coding 3GPP TS 05.04/3 GPP TS 45.004 Modulation 3GPP TS 05.05/3 GPP TS 45.005 Radio Transmission and Reception 3GPP TS 05.08/3 GPP TS 45.008 Radio subsystem link control 3GPP TS 05.10/3 GPP TS 45.010 Radio subsystem synchronization 3GPP TS 07.60 General Packet Radio Service (GPRS); Mobile Station (MS) supporting GPRS 3GPP TS 24.022 Radio Link Protocol (RLP) for circuit switched bearer and teleservices 3GPP TS 27.060 Packet domain; Mobile Station (MS) supporting Packet Switched services 3GPP TS 11.11 Specification of the Subscriber Identity Module - Mobile Equipment (SIM-ME) Interface 3GPP TS 11.12 Specification of the 3 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface 3GPP TS 11.18 Specification of the 1.8 Volt Subscriber Identity Module - Mobile Equipment (SIM - ME) Interface 3GPP TS 51.010-1 Mobile Station (MS) conformance specification; Part 1: Conformance specification 3 Abbreviations For the purposes of this standard, the following abbreviations apply. 4 General The logical structure of GPRS network is shown in Figure 1. GPRS system consists of switching subsystem, Base Station Subsystem (BSS) and Mobile Station (MS). GPRS switching subsystem consists of Serving GPRS Support Node (SGSN), Gateway GPRS Support Node (GGSN), Border Gateway (BG), Charging Gateway (CG), MSC/VLR and HLR with GPRS function, etc. GPRS MS can be grouped into three classes according to its ability to support GPRS service and GSM circuit switched service simultaneously. Class A: it supports simultaneous attachment, activation, monitoring, invocation and telecommunication services of GPRS service and GSM circuit switched service. Mobile subscribers can simultaneously initiate/receive calls of packet and circuit services according to quality of service (QoS) requirements. Class B: it supports simultaneous attachment, activation and monitoring of GPRS service and GSM circuit-switched service. However only limited simultaneous calls are supported: GPRS virtual circuit (GPRS activation) is not cleared when calling circuit-switched service and circuit-switched telecommunication, and GPRS virtual circuit is set to "busy or hold" at this time, which does not support simultaneous telecommunication service. Mobile subscribers can initiate/receive calls for packet and circuit services in turn, but not simultaneously. The mobile station automatically selects the appropriate service. Class C: it only supports the non simultaneous attachment of GPRS service and GSM circuit-switched service. If MS supports GPRS service and GSM circuit-switched service, MS in Class C may select (manually or according to default settings) to initiate/receive GPRS service or GSM circuit-switched service, and the unselected service state is deactivated, i.e., unreachable to subscribers.

Foreword i 1 Scope 2 Normative references 3 Abbreviations 4 General 5 Service and functional requirements 5.1 General 5.2 GSM circuit-switched service requirements 5.3 GSM functional requirements 5.4 GPRS MS service requirements 5.5 GPRS MS functional requirements 6 Performance requirements 6.1 Band and channel allocation 6.2 RF performance 6.3 Acoustics performance 7 Interface requirements 7.1 Um interface 7.2 SIM/ME interface 8 Requirements of electromagnetic compatibility (EMC) 9 Requirements of environmental adaptability 10 Requirements of battery and charger 10.1 Battery performance 10.2 The safety of charger 11 Appearance, packaging and assembly Annex A (Normative) Main data stored in GPRS mobile phone Annex B (Normative) Main functional requirements of mobile station

900/1800MHzTDMA数字蜂窝移动通信网 通用分组无线业务(GPRS) 设备技术要求: 移动台 1 范 围 本标准规定了900/1800MHz TDMA数字蜂窝移动通信网支持通用分组无线业务(GPRS) 的移动台 (MS) 在业务、功能、性能、接口、电磁兼容和环境适应性等方面的要求. 本标准适用于900/1800MHz TDMA数字蜂窝移动通信网支持通用分组无线业务(GPRS) 的移动台 (MS) 以及不支持GPRS的GSM移动台;其中除通用分组无线业务(GPRS) 相关的要求外的其他技术要 求适用于不支持GPRS的GSM移动台。 2规范性引用文件 下列文件中的条款通过本标准的引用而成为本标准的条款.凡是注日期的引用文件,其随后所有的 修改单(不包括勘误的内容) 或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究 是否可使用这些文件的最新版本.凡是不注日期的引用文件,其最新版本适用于本标准. GB/T 18287 GB/T 18288 GB/T 18289 YD 1268 YDT965 YD/T910.21 YDT910.22 YD 1032 ITU-T 3GPP TS 01.61 蜂窝电话用锂离子电池总规范 蜂窝电话用金属氢化物镍电池总规范 蜂窝电话用金属镉镍电池总规范 移动通信手持机锂电池及充电器的安全要求和试验方法 电信终端设备的安全要求和试验方法 移动通信手持机可靠性技术要求与测试方法 移动数字终端音频性能技术要求及测试方法 90/1800MHz TDMA 数字蜂窝移动通信网无线接口第二阶段信令部分 900/1800MHz TDMA 数字蜂窝移动通信网无线接口第二阶段物理层部分 901800MHz TDMA 数字蜂窝移动通信系统电磁兼容性限值和测量方法 第一部分: 移动台及其辅助设备 建议I240 ISDN业务能力电信业务的定义 GPRS加密算法要求 3GPP TS 02.60/3 GPP TS 22.060 GPRS业务描述: 第一阶段 3GPP TS 03.03/3 GPP TS 23.003 编号、地址和标识 3GPP TS 03.60/3 GPPTS 23.060 GPRS业务描述: 第二阶段 3GPP TS 03.64/3 GPP TS 43.064 GPRS无线接口总体描述: 第二阶段 3GPP TS 04.04/3 GPP TS 44.004 层一: 一般要求 3GPPTS 04.05/3 GPPTS44.005数据链路(DL) 层: 一般要求 3GPP TS 04.06/3 GPPTS44.06 移动台-基站系统接口数据链路(DL) 层规范 3GPP TS04.073 GPPTS24.007 移动无线接口层三信令: 概述 YD/T 1214-2006 3GPPTS 04.08/3 GPPTS 24.008 移动无线接口层三规范 3GPPTS 04.22 移动台-基站子系统 (MS-BSS) 接口及基站子系统-移动业务交换中心 (BSS-MSC) 接口数据和电信业务的无线链路协议(RLP) 3GPP TS 04.60/3 GPP TS44.060移动台-基站子系统(MS-BSS) 接口;无线链路控制媒体接人 控制 (RLC/MAC) 协议 3GPP TS 04.64/3 GPPTS 44.064 移动台-服务GPRS支持节点(MS-SGSN) 接口;逻辑链路控制层 3GPPTS 04.65/3 GPPTS4.065 移动台-服务GPRS支持节点(MS-SGSN) 接口;子网相关集中协议 3GPPTS 05.01/3 GPPTS 45.001 无线路径物理层: 概述 3GPP TS 05.02/3 GPP TS 45.002 无线路径的复用和多址接人 3GPP TS 05.03/3 GPP TS 45.003 信道编码 3GPP TS 05.04/3 GPP TS 45.004 调制 3GPP TS 05.05/3 GPP TS 45.005 无线传输和接收 3GPPTS 05.08/3 GPP TS 45.008 无线子系统链路控制 3GPP TS 05.10/3 GPP TS 45.010 无线子系统同步 3GPP TS 07.60 3GPPTS 24.022 3GPP TS 27.060 3GPP TS 11.11 3GPPTS 11.12 3GPP TS 11.18 3GPPTS 51.010-1 支持GPRS 的MS 电路交换承载业务和电信业务的无线链路协议(RLP) 分组域;MS支持的分组交换业务 用户识别模块-——移动设备(SIM-ME) 接口规范 (5V) 用户识别模块- —移动设备 (SIM-ME) 接口规范 (3V) 用户识别模块--移动设备 (SIM-ME) 接口规范(1.8V) 数字蜂窝无线电通信系统(第2+阶段) 移动台 (MS)一致性要求: 部分1一致性要求 3 缩 略 语 下列缩略语适用于本标准。 ARFCN APN BSS Cs DCE DTE GGSN Absolute Radio Frequency Channel Number Access Point Name Base Station Subsystem Coding scheme Data Circuit terminating Equipment Data Terminal Equipment Gateway GPRS Support Node 绝对射频频道号 接入点名 基站子系统 编码方式 数字电路终端设备 数字终端设备 GPRS网关节点 GMM/SM GPRS GSM GSN HLR IMEI GPRS Mobiliy Management and Session General Packet Radio Service Global System Mobile GPRS Support Node Home Location Register International Mobile Equipment Identity Management GPRS移动性管理和会话管理 通用分组无线业务 全球移动通信系统 GPRS支持节点 归属位置寄存器 国际移动设备识别 2 YD/T 1214-2006 IMSI P LLC MAC MM MO MS MSC MT NSAPI PDP PDTCH PDU PLMiN PPP P-TMSI PTP PTP-CLNS PTP-CONS QoS RLC RX SGSN SIM SM SMS SNDC SNDCP SN-PDU TLI Um 接口 VLR Intemational Mobile Subscriber Identity Internet Protoco] Logical Link Control Medium Access Control Mobility Management Mobile Originated Mobile Station Mobile Switching Center Mobile Terminated Network layer Service Access Point Identifier Packet Data Protocol Packet Date Traffic Channel Packet Data Unit Public land mobile network Point to Point Protocol Packet-TMSI Point To Point Point To Point-Connectionless Network service Point To Point-Connection Network service Quality of Service Radio Link Control Receive Serving GPRS Support Node Subscriber Identity Module Short Message Short message Service SubNetwork Dependent Convergence SubNetwork Dependent Convergence Protocol SNDCP PDU Temporary Logical link Identity Um Interface Visitor Location Register 国际移动用户识别 因特网协议 逻辑链路控制 媒体接人控制 移动性管理 移动台发起 移动台 移动业务交换中心 移动台终止 网络层业务接入点标识符 分组数据协议 分组数据传输信道 分组数据单元 公用陆地移动网 点到点协议 分组移动台临时识别号 点对点业务 点对点无连接网络业务 点对点面向连接网络业务 业务质量 无线链路控制 接收 GPRS服务节点 用户识别模块 短消息 短消息业务 子网相关汇聚 子网相关汇聚协议 子网相关汇聚协议分组数据单元 临时逻辑链路标识 基站子系统和移动台间接口 访问位置寄存器 4 概 述 GPRS网络逻辑结构示意如图1所示.GPRS系统由交换子系统、基站子系统(BSS) 和移动台 (MS) 组成.GPRS交换子系统由GPRS服务节点(SGSN) 、GPRS网关节点(GGSN) 、边界网关 (BG) 、计 费网关 (CG) 以及具有GPRS功能的MSC/VLR、HLR等组成. GPRS MS根据其同时支持GPRS业务和GSM电路交换业务的能力可划分为三类。 YD/T 1214-2006 A类: 支持GPRS业务和GSM电路交换业务的同时附着、同时激活、同时监测、同时调用和同时的通 信业务.移动用户可以根据服务质量(QoS) 要求同时发起/接受分组和电路业务的呼叫. B类: 支持GPRS业务和GSM电路交换业务的同时附着、同时激活、同时监测。仅支持有限的同时调 用: 在调用电路交换业务和进行电路交换通信时GPRS虚电路(GPRS激活) 不被清除,此时GPRS虚电路 设置为"忙或保持"，不支持同时的通信业务。移动用户可以依次发起/接收分组和电路业务的呼叫但不 能同时进行。移动台自动选择适当的业务。 C类: 仅支持GPRS业务和GSM电路交换业务的非同时附着。如果MS支持GPRS业务和GSM电路交换 业务,则C类MS可人工选择或根据缺省设置选择发起/接受GPRS业务或GSM电路交换业务,没有被选择 的业务状态为去活,即用户不可及. 信令和数据传输接口 图1 GPRS 网络逻辑结构示意 5业务与功能要求 5.1概述 本章所涉及的各类GSM电路交换业务为MS使用GSM网络进行接人时需要支持的业务。不同类型的 MS根据其应用场合和应用需求支持下面所述各类型业务中的一种或多种具体业务,但应至少支持电信业 务或承载业务中的一种具体业务.对于手持式移动台,应至少支持电话业务、紧急呼叫和基于电路域传 送的点对点短消息业务这三种电信业务及其对应的承载业务;对于车载式移动台,应至少支持电话业务, 紧急呼叫这两种电信业务及其对应的承载业务。 本章所涉及的各类GPRS分组交换业务为MS使用GPRS网络进行接入时需要支持的业务。不同类型的 MS根据其应用场合和应用需求至少支持一种具体业务及其对应的承载业务。 如果移动台支持附录B中未涉及的其他功能,则该功能应正常. 5.2 GSM电路交换业务要求 5.2.1电信业务 4 YD/T 1214-2006 MS可提供的电信业务有以下几类,见表1. 表1 GSM电信业务