1 Scope
This standard specifies technical requirements such as material, tolerance, surface treatment and appearance quality as well as inspection rules, marking, packaging and storage for pressing cage of rolling bearing.
This standard is applicable to cage with ball bearing strips or ribbon cages without rivet holes, self-aligning ball bearing cages of turned-in claw type and sunflower-shape, composite cages of cylindrical roller bearings with grooved and double caps, spherical roller bearings cages of (symmetric roller) bowl-shape, needle bearing cages of K-shape and M-shape, angular contact ball bearing cages of C-shape, tapered roller bearing cages of basket-shape, thrust ball bearing cages of II-shape as well as self-aligning thrust roller bearing cages of pot-shape.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
Contents
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Symbols
3.1 Terms and Definitions
3.2 Symbols
4 Technical Requirements
4.1 Material
4.2 Tolerance and Measurement of Pressing Cages
4.3 Surface Treatment
4.4 Appearance Quality
5 Inspection Rules
6 Marking, Packaging and Storage
