1 Scope
This standard specifies the technical requirements and methods for the cleaning, rust prevention and packaging of rolling bearings, commercial rolling elements and commercial rings.
This standard is applicable to the inspection and acceptance of the cleaning, rust prevention, inner package and outer package of rolling bearings, commercial rolling elements and commercial rings by the manufacturer and the consumer.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated reference, the latest edition of the normative document referred to applies.
GB/T 191-2000 Packaging-Pictorial Marking for Handling of Goods (eqv ISO 780: 1997)
GB/T 265-1988 Petroleum Products-Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
GB/T 267-1988 Petroleum Products - Determination of Flash and Fire Points - Open Cup
GB/T 511-1988 Petroleum Products and Additives - Determination of Mechanical Impurities - Gravimetric Method
GB/T 2361-1997 Rust Preventing Oils and Greases - Test Method of Wet Heat
GB/T 3716-2000 Pallets for Materials Handling - Vocabulary
GB/T 4122.1-1996 Packaging Terms - Basic Terms
GB/T 4122.2-1996 Packaging Terms - Machinery
GB/T 4122.3-1997 Packaging Terms - Protection
GB/T 4879-1999 Rustproof Packaging
GB/T 6388-1986 Transport Package Shipping Mark
JB/T 3016-2003 Rolling Bearings - Packaging Box - Specifications
JB/T 4036-2003 Rolling Bearings - Pallet and Wooden Case for Transportation
SH/T 0080 -1980 Rust Preventive Oils and Greases - Test Method of Corrosivity
SH/T 0081 -1980 Rust Preventive Oils and Greases - Test Method of Salt Spray
SH/T 0195-1980 Lubricating Oils - Test Method of Corrosion
SH/T 0212-1998 Rust Preventive Oils and Greases - Test Method of Removability
SH/T 0311-1981 Replacement Rust Preventing Oil - Testing Method of Artificial Sweat Replacement Performance
SH/T 0367-1980 Replacement Rust Preventing Oil
3 Terminologies
Contents
Foreword I
1 Scope
2 Normative References
3 Terminologies
4 Technical Requirements
5 Transport Package
6 Test Methods for Rust Proof Materials
7 Marking
8 Transportation, Storage and Rust Prevention Period
