1 Scope
This standard specifies the technical requirements, inspection methods, acceptance rules as well as marking and packaging of pressed housing for insert bearing.
This standard is applicable to final inspection and acceptance of finished pressed housing whose boundary dimension meets the requirements of GB/T 7809.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
GB/T 708-2006 Dimension Shape Weight and Tolerance for Cold-rolled Steel Plates and Sheets (ISO 16162: 2000, NEQ)
GB/T 7809-1995 Roiling Bearings - Housings for Insert Bearing - Boundary Dimensions (eqv ISO 3228: 1993)
GB/T 8597-2003 Rolling Bearings - Rust Proof Packaging
GB/T 13237-1991 Cold-rolled Quality Carbon Structural Steel Sheets and Strips (neq ΓOCT 16523: 1970)
JB/T 8921-1999 Rolling Bearings and Commercial Parts - Inspection Rules
Contents
Foreword I
1 Scope
2 Normative References
3 Definition and Symbol
4 Technical Requirements
5 Inspection Methods and Acceptance Rules
6 Marking, Rust Prevention, Packaging as well as Storage and Transportation
Table 1 Sampling Inspection Items of Finished Pressed Housing
