1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packing, transportation and storage of the marine disc separator (hereinafter referred to as "separator").
This standard is applicable to the design, manufacture and acceptance of such separators used for removing the moisture and mechanical admixtures in mineral oils on board.
The design, manufacture and acceptance of such separators used for removing the moisture and mechanical admixtures in mineral oils onshore may also refer to this standard.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to these specifications.
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packing, Transportation and Storage
Appendix A (Informative) Separation Conditions and Actual Capacity of Various Mineral Oils
Appendix B (Normative) Allowable Unbalance Factor of Dynamic Balance on Parts and Components of Bowl in Separators
Appendix C (Informative) Schematic Diagram of Testing System in Separator
