1 Scope
This part of GB/T 18384 specifies requirements for the electric propulsion systems and conductively connected auxiliary electric systems, if any, of electrically propelled road vehicles for the protection of persons inside and outside the vehicle against electric shock.
This part is applicable to the electrically propelled road vehicles whose maximum working voltage of on-board propulsion system is voltage class B. Electric motorcycles and electric mopeds may also refer to the provisions of this standard.
This part is not applicable to vehicles not primarily intended as road vehicles, such as material handling trucks and forklifts.
This part does not provide comprehensive safety information for manufacturing, maintenance and repair personnel of electrically propelled road vehicles.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 2893 Safety Colours (GB 2893-2008, ISO 3864-1:2002, MOD)
GB 2894 Safety Signs and Guideline for the Use
GB 4208 Degrees of Protection Provided by Enclosure (IP Code) (GB 4208-2008, IEC 60529:2001, IDT)
GB 4943.1 Information Technology Equipment-Safety-Part 1: General Requirements (GB 4943.1-2011, IEC 60950-1:2005, MOD)
GB/T 5465.2 Graphical Symbols for Use on Electrical Equipment - Part 2: Graphical Symbols (GB/T 5465.2-2008, IEC 60417 DB:2007, IDT)
GB/T 16935
(All Parts) Insulation Coordination for Equipment within Low-voltage Systems [IEC 60664 (All Parts)]
GB/T 18384.1 Electrically Propelled Road Vehicles - Safety Specifications - Part 1: On-board Rechargeable Energy Storage System (REESS) (GB/T 18384.1-2015, ISO 6469-1:2009, MOD)
GB/T 19596 Terminology of Electric Vehicles (GB/T 19596-2004, ISO 8713:2002, NEQ)
3 Terminologies and Definitions
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Voltage Class
5 Marking
6 Method and Requirements for Protection of Persons against Electric Shock
7 Test Method for Protection against Electric Shock
8 Protection against Water Effects
9 User's Manual
Appendix A (Informative) Hose Nozzle for the Test
Appendix B (Informative) Spray Nozzle for the Test
