1 Scope
This standard specifies testing methods for complete machine and components of passenger lift and freight lift.
This standard is applicable to such electrically-driven traction passenger lifts and freight lifts with rated speed no larger than 6.0m/s as well as those electrically-driven positive passenger lifts and freight lifts with rated speed no larger than 0.63m/s. And the electrically-driven traction passenger lifts and freight lifts with rated speed larger than 6.0m/s may refer to this standard, and the inapplicable part shall be determined by the manufacturer and the user through negotiation.
This standard is not applicable to the hydraulic lifts, dumbwaiter lifts and home lifts.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
Contents
Foreword I
1 Scope
2 Normative References
3 Preparation before Testing
3.1 Sample Machine
3.2 Testing Conditions
4 Complete Machine Testing
4.1 Safety Facilities or Protective Function
4.2 Lift Performance
5 Testing for Components
5.1 Lift Machine
5.2 Speed Governor
5.3 Safety Gear
5.4 Buffer
5.5 Lift Ascending Car Overspeed Protection Means
5.6 Safety Circuit with Electronic Element
5.7 Door and Door Operator
5.8 Door Lock
5.9 Suspension Terminating Device
5.10 Guide Rail
5.11 Control Cabinet and Other Electrical Apparatuses
5.12 Glass Car Wall and Glass Door
5.13 Fire Resistance Testing of Landing Door
6 Reliability Testing
6.1 Reliability Testing of Complete Lift
6.2 Reliability Testing of Control Cabinet
Appendix A (Informative) Testing Record Table
