1 Scope
This standard specifies toothpaste in terms of terms and definitions, requirements, test method, inspection rules and marking.
This standard is applicable to toothpastes for oral cleaning and care.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 601 Chemical Reagent - Preparations of Standard Volumetric Solutions
GB/T 602 Chemical Reagent–Preparations of Standard Solutions for Impurity
GB/T 603 Chemical Reagent--Preparations of Reagent Solutions for Use in Test Methods
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
GB 7917.2 Standard Method of Hygienic Test for Cosmetics-Methanol
GB 22115-2008 General Requirements on Raw Materials of Toothpastes
JJF 1070 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
AQSIQ Decree [2005]No.75 of the People's Republic of China Measures for the Metrological Supervision and Administration of Products in Prepackages with Fixed Content
Ministry of Health of the People's Republic of China Hygienic Standard for Cosmetics
Ministry of Health of the People's Republic of China Catalogue of Chinese Names of International Cosmetic Ingredient Standards
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
Toothpaste
Dentifrice preparation presented in the form of a paste, cream or gel whose main constituents are abrasive, humectant, binder, foamer, flavouring, water and other additives (including agents for oral health maintenance).
Foreword I
1 Scope
2 Normative References
3 Terms and definitions
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking
Appendix A (Normative ) Determination of Plumbum Content by Directly Injecting Sample in Graphite oven
Appendix B (Normative ) The Calculation Method of the Maximum Surface Area of the Toothpaste Sales Package
Appendix C (Informative) Fluorinion Standard Solution Gas Chromatogram
