1 Scope
This standard specifies definitions, requirements and test methods for external projections from motorcycles and mopeds.
This standard is applicable to motorcycles and mopeds.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies
GB 11566 External Projections from Passenger Cars
3 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
Radios of curvature
The radius of arc most close to circular contour of objects.
3.2
Grazing
Contact which may cause scratch to human under certain conditions.
3.3
Collision
Contact which may cause penetrating injury to human under certain conditions.
Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements 2
Appendix A (Normative) Requirements for External Projections from Motorcycles and Mopeds without Cab
Appendix B (Normative) Requirements for External Projections from Three Wheels Motorcycles and Mopeds Carrying Cargos with Cab
