1 Scope
This standard specifies the inspection and acceptance methods of railway rolling stock painting, and is applicable to the painting of railway rolling stock.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, the editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.
GB/T 9286-1988 Paints and Varnishes - Cross Cut Test for Films (eqv ISO 2409:1972)
TB/T 2879.1-1998 Paint and Painting of Railway Rolling Stock - Part 1: Technical Specification for Supply of Paints (neq UIC 842.1-1975)
TB/T 2879.2-1998 Paint and Painting of Railway Rolling Stock - Part 2: Methods for Testing Paints (neq UIC 842.2-1975)
TB/T 2879.3-1998 Paint and Painting of Railway Rolling Stock - Part 3: Technical Specification for Surface Treatment of Metallic and Nonmetallic Materials (neq UIC 842.3-1979)
TB/T 2879.4-1998 Paint and Painting of Railway Rolling Stock - Part 4: Technical Specification for Protection and Painting of Freight Car (neq UIC 842.4-1979)
TB/T 2879.5-1998 Paint and Painting of Railway Rolling Stock - Part 5: Technical Specification for Protection and Painting of Passenger Car and Tractive Units (neq UIC 842.5-1975)
3 Inspection and Acceptance Rules
3.1 Inspection of surface treatment
User representatives shall inspect rolling stock and its components to determine whether they have been subject to surface treatment in accordance with the requirements of TB/T 2879.3.
Foreword II
1 Scope
2 Normative References
3 Inspection and Acceptance Rules
4 Documentation
