1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport, storage and accompanied documents about detachable container garbage collector. This standard is applicable to various detachable container garbage collectors modified with stereotyped automobile chassis and detachable container garbage semi-trailer (hereinafter referred to as garbage collectors).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 1495 Limits and Measurement Methods for Noise Emitted by Accelerating Motor Vehicles
GB 1589 Limits of Dimensions, Axle Load and Masses for Motor Vehicles, Trailers and Combination Vehicles
GB/T 3766 Hydraulic Fluid Power - General Rules Relating to Systems
GB 4785 Prescription for Installation of the External Lighting and Light-signaling Devices for Motor Vehicles and Their Trailers
GB 7258 Technical Specifications for Safety of Power-driven Vehicles Operating on Roads
GB/T 9969.1 General Principles for Preparation of Instructions for Use of Industrial Products
GB 11567.1 Motor Vehicles and Trailers - Lateral Protection Requirements
GB 11567.2 Motor Vehicles and Trailers - Rear Underrun Protection Requirements
GB/T 12534 Motor Vehicles - General Rules of Road Test Method
QC/T 52 Refuse Collection Vehicle
QC/T 252 Special Purpose Vehicle - Engineering Approval Evaluation Program
QC/T 484 Automobile Paint Coating
QC/T 625 Metallic Coatings and Conversion Coatings for Automobiles
QC/T 848-2011 Hook Loader Container Handling Device
QC/T 29104 Limiting Value of Contamination Level of Solid Particles of Special Purpose Vehicle Hydraulic System
JB/T 5943 Engineering Machinery General Technical Specifications for Weldments
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in QC/T 848-2011 and the following apply.
3.1
container loading
the process that the hook loader drags the container from the ground surface to the container supporting surface and fixes it
3.2
container unloading
the process that the hook loader pushes the container from container supporting surface to the ground surface and releases it
3.3
discharging
the process that the hook loader lifts the container to the dumping angle, discharges, retracts and fixes the container
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Method
6 Inspection Rules
7 Marking, Packaging, Transport, Storage and Accompanied Documents
Annex A (Informative) Test Record Sheet
