1 Scope
This standard specifies the terms and definitions, requirements, test methods, test rules, marking, instructions, packaging, transportation and storage of metal furniture.
This standard is applicable to metal furniture used indoors, and may also serve as a reference for other furniture with metal members.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 1732 Determination of impact resistance of film
GB/T 1931 Method for determination of the moisture content of wood (GB/T 1931-2009, ISO 3130: 1975, MOD)
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 3325-2008 Metal furniture - General technical requirements
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing (GB/T 3920-2008, ISO 105-X12: 2001, MOD)
GB/T 4689.20 Leather - Determination for adhesion of finish (GB/T 4689.20-1996, ISO 11644: 1993, EQV)
GB/T 4893.1 Furniture - Assessment of surface resistance to cold liquids
GB/T 4893.2 Furniture - Assessment of surface resistance to wet heat
GB/T 4893.3 Furniture - Assessment of surface resistance to dry heat
GB/T 4893.4 Furniture - Assessment of adhesion of surface coatings - Cross cut
GB/T 4893.7 Furniture - Assessment of surface resistance to alteration of heat and cold
GB/T 4893.8 Furniture - Assessment of wearability of surface coatings
GB/T 4893.9 Furniture - Test for surfaces - Assessment of resistance to impact
GB 5296.6 Instructions for use of products of consumer interest - Part 6: Furniture
GB/T 6669-2008 Flexible cellular polymeric materials - Determination of compression set [ISO 1856: 2000(E), IDT]
GB/T 6739-2006 Paints and varnishes - Determination of film hardness by pencil test (ISO 15184: 1998, IDT)
GB/T 7573 Textiles - Determination of pH of aqueous extract (GB/T 7573-2009, ISO 3071: 2005, MOD)
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Test rules
7 Marking, instructions, packaging, transportation and storage
Annex A (Normative) Annual average equilibrium wood moisture content in China
Annex B (Informative) Mechanical property test level of furniture
Bibliography
