Down and feather quilts
1 Scope
This document specifies the requirements for down and feather quilts, describes corresponding test methods, and specifies inspection rules, marking, packaging, transportation and storage.
This document is applicable to the design, production, inspection and sale of down quilts, feather quilts, composite down quilts and composite feather quilt products.
This document is not applicable to the design, production, inspection and sale of quilt products filled with a mixture of down and feather and other fillers.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for color fastness - Grey scale for assessing change in color
GB/T 2910 (All parts) Textiles - Quantitative chemical analysis
GB/T 3920 Textiles - Tests for colour fastness - Color fastness to rubbing
GB/T 3921-2008 Textiles - Tests for color fastness - Color fastness to washing with soap or soap and soda
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 5453 Textiles - Determination of the permeability of fabrics to air
GB/T 6529 Textiles - Standard atmospheres for conditioning and testing
GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 8630 Textiles - Determination of dimensional change in washing and drying
GB/T 10288 Test method for down and feather
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 17685 Down and feather
GB 18383 General technical requirements for products with filling materials
GB 18401 National general safety technical code for textile products
GB/T 23322-2018 Textiles - Determination of surfactant - Alkylphenols and Alkylphenol ethoxylates
GB/T 24121 Textile products - Determination of the remains of broken sewing needle
GB/T 29862 Textiles - Identification of fiber content
GB 31701 Safety technical code for infants and children textile products
FZ/T 01057 (All parts) Test method for identification of textile fibers
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 17685 and the following apply.
3.1
down quilts
quilt product with down of the same specification as the only filler
3.2
feather quilts
quilt product with feather of the same specification as the only filler
3.3
composite down quilts
quilt product which meets all the following requirements:
a) made of two or more kinds of down feathers of different specifications or down feathers mixed with other filling materials in layers or partitions; b) the mass percentage of down part is not less than 50%
3.4
composite feather quilts
quilt product which meets all the following requirements:
a) made of two or more kinds of down feathers of different specifications or down feathers mixed with other filling materials in layers or partitions; b) the mass percentage of the feather part is not less than 50%.
3.5
outer shell
outer jacketed textile used to directly or indirectly wrap and retain fillers
3.6
interior lining
fabric inside the outer shell (3.5) for retaining and wrapping the fillers and performing as an anti-drilling function
3.7
mass percentage of down and feather
percentage of down and feather fillers in composite quilts (3.3) or composite feather quilts (3.4) as a percentage of total fillers mass
4 Requirements
4.1 Technical requirements for basic safety
Outer shell and interior lining shall meet the requirements specified in GB 18401 and GB 31701.
4.2 Inherent quality
4.2.1 Fillers
Fillers shall meet the requirements specified in Table 1.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging, transportation and storage
9 Others
Annex A (Normative) Appearance defects and degree description
Annex B (Normative) Test method of anti-drilling function of down and feather quilts
