1 Scope
This part of GB/T 3903. specifies a test method for determining the peel strength of touch and close fasteners before and after repeated use.
This part is applicable to all footwear accessories.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 3903. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 16825.1-2002 Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System (ISO 7500-1:1999, IDT)
GB/T 22049 Footwear — Standard Atmospheres for Conditioning and Testing of Footwear and Components for Footwear (GB/T 22049-2008, ISO 18454:2001, IDT)
EN 12240 Touch and Close Fasteners — Determination of the Overall and Effective Widths of Tapes and the Effective Width of a Closure
3 Terms and Definitions
For the purposes of this part of GB/T 3903, the following terms and definitions apply.
3.1
Peel strength
Force per unit effective width required to separate the two tapes forming the specified closure from an open edge under the specified conditions of test.
3.2
Effective width
Width of the pile at 90° to the length of the tape and which does not include the selvedge.
