Footwear for older people
1 Scope
This document specifies the technical requirements, result judgment, inspection rules, packaging, transportation, and storage requirements of footwear for older people, and describes the corresponding test methods.
This document is applicable to the production, inspection and sales of footwear (including boots) for older people.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 2703 Footwear - Vocabulary
GB/T 3903.1 Footwear - Test methods for whole shoe - Flexing resistance
GB/T 3903.2 Footwear - Test methods for whole shoe - Abrasion resistance
GB/T 3903.3 Footwear - General test methods - Peeling strength
GB/T 3903.4 Footwear - Test methods for whole shoe - Hardness
GB/T 3903.5 Footwear - General test methods - Appearance quality
GB/T 3903.6-2017 Footwear - Test methods for whole shoe - Slip performance
GB/T 3903.20 Footwear - Test methods for accessories: Touch and close fasteners - Peel strength before and after repeated closing
GB/T 3903.21 Footwear - Test methods for accessories: Touch and close fasteners - Shear strength before and after repeated closing
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods
GB/T 21284-2015 Footwear - Test methods for whole shoe - Thermal insulation
GB/T 21396 Footwear - Test methods for whole shoe - Upper sole adhesion
GB/T 30907 Rubber shoes - Test method for shock attenuating properties of athletic shoes
HG/T 2876 Cellular material for rubber-plastics shoes - Determination of compression set
QB/T 1187 Footwear - Principle of inspection and marking, package, transportation, storage
QB/T 2224-2012 Footwear - Performance requirement for uppers low-temperature flexing resistance
QB/T 2673 The labeling for footwear product
QB/T 2881-2013 Footwear and footwear components - Antimicrobial performance specifications
QB/T 2882-2023 Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing and bleeding
3 Terms and definitions
For the purposes of this document, the terms and definitions established in GB/T 24548 and GB/T 26779-2021 and the following apply.
3.1
footwear for older people; footwear for elderly people
shoes (including boots) designed and produced for daily wear according to the foot characteristics and wearing needs of the elderly
Note: Article 2 of the Law of the People's Republic of China on the Protection of the Rights and Interests of the Elderly specifies that "the elderly refer to citizens over 60 years of age".
4 Technical requirements
4.1 Style design
4.1.1 The upper should be fixed with movable buckle or adhesive belt structure or an easy-to-wear and take-off structure, and the tie strap structure with free end should not be adopted.
4.1.2 Reflective strips (belts) should be provided on the back or outer side of the shoe upper.
4.1.3 The toe cap should be round or wide.
4.2 Marking
The marking shall be the requirements of QB/T 2673.
4.3 Sensory quality
4.3.1 The complete shoe shall be upright, flat, clean, with an inner cushion that fits snugly, and the feather line shall be neat and tight.
4.3.2 There shall be no adhesive opening in the overall appearance.
Note: Sample photos of adhesive opening are provided in 4.3 of GSB 16-1450-2014.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Test methods
6 Result judgment
7 Inspection rules, packaging, transportation and storage
Bibliography
