Nonwoven adhesive interlining
1 Scope
This document defines the terms and definitions of nonwoven adhesive interlinings, specifies the product classification and labeling, technical requirements, inspection rules, and marking and packaging, and describes the corresponding methods for test and inspection.
This document is applicable to various kinds of white, bleached, and dyed nonwoven adhesive interlinings produced by hot air, hot rolling, or dipping processes.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for color fastness - Grey scale for assessing change in color
GB/T 3921-2008 Textiles - Tests for colour fastness - Color fastness to washing with soap or soap and soda
GB/T 4666 Textiles - Fabrics - Determination of width and length
GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to dry cleaning using perchloroethylene solvent
GB/T 6152-1997 Textiles - Tests for colour fastness - Colour fastness to hot pressing
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 15557 Standard terminology relating to apparel
GB 18401 National general safety technical code for textile products
GB/T 24218.1 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area
GB/T 28465 Inspection rules for garment interlining
GB 31701 Safety technical code for infants and children textile products
GB/T 31902 Inspection method for appearance detects on garment interlinings
GB/T 31903 Identification, marking and packing for garment interlining
FZ/T 01047 Standard light sources and conditions for visual assessment of textile colour fastness
FZ/T 01081 Testing method for coating weight of fusible interlinings
FZ/T 01082 Testing method for heat dimensional change of fusible interlinings
FZ/T 01083 Testing method for surface appearance and dimensional change on dry cleaning for fusible interlinings
FZ/T 01084 Testing method for surface appearance and dimensional change after washing for fusible interlinings
FZ/T 01085-2018 Testing method for peeling strength of fusible interlinings
FZ/T 01110 Testing method for adhesive penetration of interlining after pressing
FZ/T 60031-2020 Testing method for surface appearance and dimensional change after steam-press for garment interlinings
FZ/T 60034-2021 Testing method for flaking powder from adhesive-bonded interlinings
FZ/T 60047 Testing method for dimensional change of garment interlinings after washing
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 as well as the following apply.
3.1
nonwoven adhesive interlining
interlining made of nonwoven fabric which is formed by carding short fibers into a network, and processed by coating and other dyeing and finishing techniques
3.2
composite specimen
specimen of the adhesive lining bonded with the standard fabric through ironing
4 Product classification and labeling
4.1 Product classification
4.1.1 Nonwoven adhesive interlinings can be classified into polyester interlining, nylon interlining, and polyester-nylon interlining according to the base fabric.
4.1.2 Nonwoven adhesive interlinings can be classified into shirt interlining, coat interlining, silk interlining and fur interlining based on the purpose.
4.2 Labeling
In accordance with those specified in GB/T 31903.
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Product classification and labeling
5 Technical requirements
6 Methods for test and inspection
7 Inspection rules
8 Marking and packaging
9 Others
Annex A (Normative) Sample photograph for evaluation of appearance change of adhesive interlining after washing
