1 Scope
This Standard specifies a method for the determination of length and width of textile fabrics that are in a tension-free relaxed state.
The test is applicable to textile fabrics of full width, folded lengthwise down the middle, or in tubular form, but no longer than 100 m.
This International Standard does not specify a method to determine or describe construction defects or other defects.
2 Normative References
The following documents contain provisions which, by reference into this standard, constitute the provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest editions apply.
GB/T 6529 Textiles - Standard Atmospheres for Conditioning and Testing (GB/T 6529-2008, ISO 139: 2005,MOD)
GB/T 19022 Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment (GB/T 19022-2003, ISO 10012: 2003, IDT)
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Sampling
6 Apparatus
7 Standard Atmosphere for Conditioning, Testing and Relaxation
8 Procedure
9 Calculation and Expression of Results
10 Test Report
Appendix A (Informative) Arrangement for Conditioning, Relaxing and Measurement of Fabrics
