Inspection rules for garment interlining
1 Scope
This document specifies the sampling method, inspection method, inspection evaluation, re-inspection and inspection report of garment interlining.
This document is applicable to woven interlining, knitted interlining and non-woven interlining made of various materials.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 31903 Identification, marking and packing for garment interlining
3 Terms and definitions
No terms and definitions are listed in this document.
4 General
4.1 The inspection content shall include the physical and chemical properties, appearance quality, designation, marking and packaging, and length.
4.2 The supplier shall issue the product inspection certificate based on the inspection results of product quality.
4.3 The purchaser shall, within 15 days after receiving the product (unless otherwise agreed by both parties), accept the product according to the sales contract of the supplier and the purchaser or product standard, and notify the supplier of the acceptance result in time. If the supplier fails to reply within 15 days or the time agreed by both parties, the acceptance result of the purchaser shall prevail.
4.4 If the purchaser fails to inform the supplier of the acceptance results within 15 days after receiving the products or within the time agreed by both parties due to the condition limited, the goods shall be received according to the supplier's inspection results.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Sampling method
6 Inspection method
7 Inspection evaluation
8 Re-inspection
9 Inspection report
