1 Scope
This standard specifies the emission limits, monitoring and controlling requirements of such stationary-source air pollutants as sulfur dioxide, nitrogen oxide and particulate matters as well as the relevant regulations of standard impelmentation, supevision and the like.For control indexes unspecified in this standard and which are provided with relevant provincial or national standards and monitoring methods, they shall be in accordance with the requirements of relevant standards.
This standard is applicable to the environmental impact assessment, environment protection facility design andcompletion acceptance of environmental protection of all stationary source construction projectsas well as the emission management of air pollutants after the stationary source construction project is putinto operation.
2 Normative References
The following documents for the application of this document are essential. For the dated normative references, only the dated editions are applicable to this document.For the undated normative references, the latest editions (including all amendments) apply.
GB/T 16157 The Determination of Particulates and Sampling Methods of Gaseous Pollutants Emitted from Exhaust Gas of Stationary Source
HJ/T 42 Stationary Source Emission - Determination of Nitrogen Oxide - Ultraviolet Spectrophotometric Method
HJ/T 43 Stationary Source Emission - Determination of Nitrogen Oxid - N(1-naphtye) - Ethylenediamine Dihydrochloride Spectrophotometric Method
HJ/T 56 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Iodine titration Method
HJ/T 57 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source - Fixed-potential Electrolysis Method
HJ/T 75 Specifications for Continuous Emissions Monitoring of Flue Gas Emitted from Stationary Sources (on Trail)
HJ/T 76 Specification and Test Procedures for Continuous Emission Monitoring Systems of Flue Gas Emitted from Stationary Sources (on Trial)
HJ/T 373 Technical Specifications of Quality Assurance and Quality Control for Monitoring of Stationary Pollution Source (on Trial)
HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source
HJ 629 Determination of Sulphur Dioxide from Exhausted Gas of Stationary Source Nondispersive Infrared Absorption Method
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Content
5 Monitoring Requirements
6 Implementation and Supervision
