This standard specifies the basic rules for checking the constructed, renovated and extended painting engineering (including painting equipment and machinery) and safety facilities in workplace.
This standard is applicable to the checking of painting engineering on metallic or non-metallic surface by with paint and relevant chemicals (including organic solvent) and the checking of safety facilities for painting engineering on non-metallic surfaces of plastic products, textiles, leathers and timbers etc..
This standard may also be referred with regard to technical review on safety of painting process, painting location and design, production, fabrication and installation of painting equipment and machinery, painting in the open air, and interior and exterior overcoating for buildings and structures etc..
Foreword I
1. Scope
2. Normative References
3. Terms and Definitions
4. General Requirements
5. General Layout
6. Safety of Painting Equipment
7. Fire and Explosion Prevention
8. Electrical Safety
9. Lightning Protection and Electrostatic Prevention
10. Requirements for Control of Occupational Hazards
11. Other Matters Related to Acceptance
