标准编号:	YS/T 429.2-2012
中文名称:	铝幕墙板 第2部分：有机聚合物喷涂铝单板
英文名称:	Aluminum curtain wall panel—Part 2:Aluminum panel with organic polymer coating
中标分类:	H61    轻金属及其合金
行业分类:	YS    有色金属行业标准
ICS分类:	77.150.10 77.150.10    铝产品 77.150.10
发布机构:	中华人民共和国工业和信息化部
发布日期:	2012-11-7
实施日期:	2013-3-1
标准状态:	valid
替代旧标准:	YS/T 429.2-2000 铝幕墙板 氟碳喷漆铝单板
翻译语言:	英文
文件格式:	PDF
中文字符数:	14000 字
翻译价格(元):	840.0
交付时间:	付款后 1 个工作日

Foreword Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. YS/T 429 Aluminum curtain wall panel consists of two parts: ——Part 1: Mill finish sheet and strip; ——Part 2: Aluminum panel with organic polymer coating. This part is Part 2 of YS/T 429. This part is developed in accordance with the rules given in GB/T 1.1-2009. This part replaces YS/T 429.2-2000 Aluminum curtain wall panel - Aluminum panel with PVDF coating The following main technical changes have been made with respect to YS/T 429.2-2000: ——Alloy designation 8011A, Layer-4 PVDF coating and powder coating have been added; ——The pretreatment requirements before coating have been modified; ——The performance requirements and test procedures for hydrochloric acid resistance and mortar resistance of fluorocarbon paint coating products have been added; ——The coating thickness, nitric acid resistance, resistance to solvent, salt spray corrosion resistance and humidity resistance of fluorocarbon paint coating products have been modified; ——The test procedures of impact resistance, nitric acid resistance, resistance to solvent, resistance to detergent and salt spray corrosion resistance of fluorocarbon paint coating products have been modified; ——The sampling regulations for aluminum panels have been modified. In this part, the related contents of aluminum panel with organic polymer coating are compiled by the redrafting method with reference to AAMA 2604:2005 Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels and AAMA 2605:2005 Voluntary Specification, Performance Requirements and Test Procedures for High Superior Performance Organic Coatings on Aluminum Extrusions and Panels. This part is not equivalent to AAMA 2604:2005 and AAMA 2605:2005. This part is under the jurisdiction of National Technical Committee on Nonferrous Metals of Standardization Administration of China (SAC/TC 243). The previous edition of this part is as follows: ——YS/T 429.2-2000. Aluminum curtain wall panel - Part 2: Aluminum panel with organic polymer coating 1 Scope This part specifies the requirements, test procedures, inspection rules, marking, packaging, transportation and storage, as well as the quality certificate and order (or contract) contents of the aluminum panel with organic polymer coating for the curtain wall. This part is applicable to the aluminum and aluminum alloy single-layer formed panel for curtain walls (hereinafter referred to as “the aluminum panel”) with fluorocarbon paint (polyvinylidene fluoride) or powder (thermosetting organic polymer) as surface coating. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition (including any amendments) applies. GB/T 3199 Wrought aluminium and aluminium alloy products - Packing, marking, transporting and storing GB/T 3880.3 Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions GB 5237.4 Wrought aluminium alloy extruded profiles for architecture - Part 4: Powder coating profiles GB 5237.5 Wrought aluminium alloy extruded profiles for architecture - Part 5: PVDF coating profiles GB/T 8005.3-2008 Aluminium and aluminium alloys - Terms and definitions - Part 3: Surface treatment GB/T 8013.3-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 3: Organic polymer coatings GB/T 9761 Paints and varnishes - Visual comparison of the colour of paints GB/T 16865 Test pieces and method for tensile test for wrought aluminum and magnesium alloy products YS/T 429.1 Aluminum curtain wall panel - Mill finish sheet and strip 3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 8005.3-2008 and GB/T 8013.3-2007 apply. 4 Requirements 4.1 Product classification 4.1.1 Designation, state and specification Product designation, supply state, thickness, length, width as well as state of the mill finish sheet and strip shall comply with those specified in Table 1. Other designation and state required by the purchaser shall be determined upon the agreement between the supplier and the purchaser and indicated in the purchase order (or contract).

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Requirements 5 Test procedure 6 Inspection rules 7 Marking, packaging, transportation, storage and quality certificate 8 Order (or contract) contents

ICS 77.150.10 H 61 YS 中华人民共和国有色金属行业标准 YS/T 429.2—2012 代替YS/T 429.2—2000 铝幕墙板 第2部分：有机聚合物喷涂铝单板 Aluminum curtain wall panel- Part 2：Aluminum panel with organic polymer coating 2012-11-07发布 2013-03-01实施 中华人民共和国工业和信息化部 发布 前 言 YS/T 429《铝幕墙板》分为两部分： ——第1部分：板基； ——第2部分：有机聚合物喷涂铝单板。 本部分为YS/T 429第2部分。 本部分按照GB/T 1.1—2009给出的规则起草。 本部分代替YS/T 429.2—2000《铝幕墙板 氟碳喷漆铝单板》。 本部分与YS/T 429.2—2000相比主要技术变化如下： ——增加了合金牌号8011A和氟碳漆四涂和粉末涂层种类； ——修改了喷涂前的预处理要求； ——增加了氟碳漆涂层产品的耐盐酸性、耐砂浆性能要求及试验方法； ——修改了氟碳漆涂层产品的涂层厚度、耐硝酸性、耐溶剂性、耐盐雾腐蚀性以及耐湿热性性能要求； ——修改了氟碳漆涂层产品的耐冲击性、耐硝酸性、耐溶剂性、耐洗涤剂性以及耐盐雾腐蚀性试验方法； ——修改了铝单板取样规定。 本部分使用重新起草法参考AAMA 2604：2005《铝挤压材、板材的高性能有机涂层性能要求与试验方法》、AAMA 2605：2005《铝挤压材、板材的超高性能有机涂层性能要求与试验方法》编制了有机聚合物喷涂铝单板的有关内容。本部分与AAMA 2604：2005、AAMA 2605：2005的一致性程度为非等效。 本部分由全国有色金属标准化技术委员会(SAC/TC 243)归口。 本部分所代替标准的历次版本发布情况为： ——YS/T 429.2—2000。 铝幕墙板 第2部分：有机聚合物喷涂铝单板 1 范围 本部分规定了幕墙用有机聚合物喷涂铝单板的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与订货单(或合同)内容。 本部分适用于以氟碳漆(聚偏二氟乙烯)或粉末(热固性有机聚合物)作表面涂层的幕墙用铝及铝合金单层成形板(以下简称铝单板)。 2 规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。 GB/T 3199 铝及铝合金加工产品包装、标志、运输、贮存 GB/T 3880.3 一般工业用铝及铝合金板、带材 第3部分：尺寸偏差 GB 5237.4 铝合金建筑型材 第4部分：粉末喷涂型材 GB 5237.5 铝合金建筑型材 第5部分：氟碳漆喷涂型材 GB/T 8005.3—2008 铝及铝合金术语 第3部分：表面处理 GB/T 8013.3—2007 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分：有机聚合物喷涂膜 GB/T 9761 色漆和清漆 色漆的目视比色 GB/T 16865 变形铝、镁及其合金加工制品拉伸试验用试样及方法 YS/T 429.1 铝幕墙板板基 3 术语和定义 GB/T 8005.3—2008、GB/T 8013.3—2007界定的术语和定义适用于本文件。 4 要求 4.1 产品分类 4.1.1 牌号、状态、规格 产品牌号、供应状态、厚度、长度、宽度以及板基状态应符合表1的规定。需方需要其他牌号、状态时，由供需双方协商确定后在订货单(或合同)中具体注明。 表1 牌号 板基状态 供应状态 厚度mm 宽度mm 长度mm 4.1.2 涂层种类 涂层种类应符合表2的规定。 表2 涂层种类 代号 氟碳漆涂层 二涂：底漆加面漆 PVDFL2 三涂：底漆、面漆加清漆 PVDFL3 四涂：底漆、阻挡漆、面漆加清漆 PVDFL4 粉末涂层 聚酯 SPP 氟碳 PVDFP 4.1.3 标记 铝单板标记按产品名称、本部分编号、产品牌号、供应状态、产品规格(由板基厚度与铝单板代号两部分组成)、涂层种类代号、颜色代号的顺序表示。标记示例如下： 用3003合金制造的，供应状态为H44，板基厚度3.00mm，铝单板代号为1234，表面颜色为灰色(代号7037)的三涂氟碳漆铝单板，标记为： 铝单板YS/T 429-3003H44-3.0×1234-PVDFL3-色7037 4.2 板基质量 4.2.1 8011A牌号的铝单板用板基的不平度应符合表3规定。 4.2.2 牌号状态为8011A-H14、8011A-H24的铝单板用板基的力学性能应符合表4规定。 4.2.3 铝单板用板基的其他质量应符合YS/T 429.1相应牌号的规定。