Testing Methods for User Equipment (HSDPA)of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network HSDPA Part 1:Basic Operation、Services and Performance Test
1 Scope
This part specifies the testing methods for user equipment of TD-SCDMA digital cellular mobile communication network in services, operation, radio frequency performance, audio frequency, environment and reliability, electromagnetic compatibility and service life.
This part is applicable to all versions of TD-SCDMA Terminals. As for the HSDPA related requirements, the one for the terminal supporting single carrier HSDPA operation is requisite.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
YD/T 856-1996 Technical requirement and test method for power supply of mobile communication handsets
GB/T 18287-2000 General specification of lithium-ion battery for cellular phone
GB/T 18288-2000 General specification of nickel-metal hydride battery for cellular phone
GB/T 18289-2000 General specification of nickel-cadmium battery for cellular phone
GB 4943-2001 Safety of information technology equipment
GB/T2421-1999 Environmental testing for electric and electronic products--Part 1: General and guidance
GB/T2423.1-2001 Environmental testing for electric and electronic products--Part 2: Test methods--Tests A: Cold
GB/T2423.2-2001 Environmental testing for electric and electronic products--Part 2:Test methods--Tests B: Dry heat
GB/T2423.3-1993 Basic environmental testing procedures for electric and electronic products-Test Ca: Damp heat, steady state
GB/T2423.5-1995 Environmental testing for electric and electronic products Part 2:Test methods Test Ea and guidance: Shock
GB/T2423.6-1995 Environmental testing for electric and electronic products-Part 2: Test methods-Test Eb and guidance: Bump
GB/T2423.11-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fd: Random vibration wide band—General requirements
GB/T2423.13-1997 Environmental testing for electric and electronic products Part 2: Test methods Test Fdb: Random vibration wide band—Reproducibility medium
GB/T2423.17-1993 Basic environmental testing procedures for electric and electronic products Test Ka: Salt mist
GB/T2423.22-2002 Environmental testing for electric and electronic products--Part 2:Test methods Test N: Change of temperature
GB/T2423.44-1995 Environmental testing for electric and electronic products Part 2: Test methods Test Eg: Impact, spring hammer
GB/T2424.1-1989 Basic environmental testing procedures for electric and electronic products Guidance for high temperature and low temperature tests
GB/T2424.2-1993 Basic environmental testing procedures for electric and electronic products Guidance for damp heat tests
GB/T2424.13-2002 Environmental testing for electric and electronic and electronic products--Part 2:Test methods--Guidance on change of temperature tests
GB 4796-84 Classification of environmental parameters and their severities of electric and electronic products
GB/T4798.7-87 Environmental conditions existing in the application of electric and electronic products; Portable and non-stationary use
GB/T6113.1-1995 Specifications for radio disturbance and immunity measuring apparatus
GB 9254 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
GB 17625.1 The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments (equipment input current≤16A per phase)
GB 17625.2 Electromagnetic compatibility limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A
GB/T 17626.2 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
GB/T 17626.4 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.5 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
GB/T 17626.6 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields
GB/T 17626.11 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
YD/T 1776-2008 Technical Requirements for User Equipment (HSDPA)of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network
ISO 7637-1 (1990 Road vehicles - Electrical disturbances from conduction and coupling -Part 1: Definitions and general considerations
ISO 7637-2 (1990 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ITU-RSM.329-10 Unwanted emissions in the spurious domain
3GPPTS 34.108 Common Test Environments for User Equipment (UE) Conformance Testing
3GPPTS 34.123 User Equipment (UE) conformance specification; Part 1: Protocol conformance specification
3 Abbreviations
For the purposes of this part, the following abbreviations apply.
ACLR Adjacent Channel Leakage power Ratio
ACS Adjacent Channel Selectivity
AFC Automatic Frequency Control
AGC Automatic Gain Control
AM Acknowledged Mode
AMR Adaptive Multi Rate
ANR Ambient Noise Rejection
AS Access Stratum
ASD Acceleration Spectral Density
ATM Asynchronous Transfer Mode
AuC Authentication Centre
AWGN Additive White Gaussian Noise
BCCH Broadcast Control Channel
BCH Broadcast Channel
BER Bit Error Ratio
BLER Block Error Ratio
CCCH Common Control Channel
CCPCH Common Control Physical Channel
CM Connection Management
CN Core Network
CRNC Controlling Radio Network Controller
CS Circuit Switched
Foreword i
1 Scope
2 Normative References
3 Abbreviations
4 Test Environment
5 Services
6 UE Basic Operations
7 RF Performance
8 Terminal Electricity Consumption Performance Test
9 Audio Frequency
10 Reliability
11 Electromagnetic Compatibility
12 Specific Absorption Rate (SAR) Test
13 Battery Charger Test
14 Package and Appearance
Annex A (Informative) Reference Signaling Process
Annex B (Normative) Measurement Channel
Annex C (Normative) Propagation Condition
Annex D (Normative) Test Environment
Annex E (Normative) Basic Test Flow
Annex F (Normative) Pilot Frequency Cell Reelection
Annex G (Normative) Default Message
