Technical Requirements for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment (Phase 3)
1 Scope
This standard mainly specifies the requirements of WCDMA user equipment (UE) in Phase 3 of 2GHz WCDMA digital cellular mobile communication network in terms of functions, performance, interface, environment and reliability, as well as batteries and chargers, etc.
This standard is applicable to all types of WCDMA modules of single-mode terminals, dual-mode terminals and multi-mode terminals in Phase 3 of 2GHz WCDMA digital cellular mobile communication network.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 18287 General Specification of Lithium-ion Cells and Batteries for Mobile Phone
GB/T 18288-2000 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289-2000 General Specification of Nickel-cadmium Battery for Cellular Phone
GB 21288-2007 Limits for Human Local Exposure to Electromagnetic Fields Emitted by Mobile Phones
GB 4943-2001 Safety of Information Technology Equipment
YD 1268.1-2003 The Safety Specification and Test Method for Lithium Batteries
YD 1268.2-2003 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1490-2006 The Technical Requirements for Mobile Termination Supporting J2ME
YD/T 1492-2006 Technical Requirements of WAP Terminal in Digital Cellular Mobile Telecommunication Network
YD/T 1496-2006 Digital Cellular Mobile Telecommunication Network Service Technical Specification for Mobile Streaming Terminal
YD/T 1501-2006 Digital Cellular Mobile Telecommunication Network Specification for Multimedia Message Service Terminal Equipment
YD/T 1511-2007 Technical Specification for 2GHz TD-SCDMA/WCDMA CS Video Telephony Service
YD/T 1538-2006 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539-2006 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment
YD/T 1595.1-2007 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz WCDMA Digital Cellular Mobile Communication System—Part 1: User Equipment and Ancillary Equipment
YD/T 1762.1-2008 TD-SCDMA/WCDMA Digital Cellular Mobile Telecommunication Network—Technical Specification for USIM-ME (Cu) Interface—Part 1: Physical, Electrical and Logical Characteristics
YD/T 1762.2-2008 TD-SCDMA/WCDMA Digital Cellular Mobile Telecommunication Network—Test Methods for USIM-ME (Cu) Interface—Part 2: Application Characteristics of USIM
YD/T 1762.3-2008 TD-SCDMAWCDMA Digital Cellular Mobile Communication Network—Technical Specification for USIM-ME (Cu) Interface—Part 3: Characteristics of USAT
3GPP TS 25.101 UE Radio Transmission and Reception (UTRA FDD)
3GPP TS 25.201 Physical Layer—General Description
3GPP TS 25.211 Physical Channels and Mapping of Transport Channels onto Physical Channels (FDD)
3GPP TS 25.212 Multiplexing and Channel Coding (FDD)
3GPP TS 25.213 Spreading and Modulation (FDD)
3GPP TS 25.215 Physical Layer; Measurements (FDD)
3GPP TS 25.301 Radio Interface Protocol Architecture
3GPP TS 25.321 Medium Access Control (MAC) Protocol Specification
3GPP TS 25.322 Radio Link Control (RLC) Protocol Specification
3GPP TS 25.324 Broadcast/Multicast Control (BMC)
3GPP TS 25.331 Radio Resource Control (RRC); Protocol Specification
3GPP TS 31.102 Characteristics of the Universal Subscriber Identity Module (USIM) Application
3GPP TS 31.111 Universal Subscriber Identity Module (USIM) Application Toolkit (USAT)
ETSI TS 102 221 Smart Cards; UICC-Terminal interface; Physical and Logical Characteristics
3 Abbreviations and Symbols
3.1 Abbreviations
4 General
UMTS is the third-generation (3G) mobile telecommunication system with WCDMA air interface. The whole UMTS system consists of User Equipment (UE), UMTS Radio Access Network (UTRAN) and Core Network (CN). In this standard, UMTS system is also called as WCDMA telecommunication system.
WCDMA terminal equipment, also known as User Equipment (UE), can be classified into many types according to their different purposes and functions. The terminal shall provide corresponding compatibility interfaces according to the different connected devices, such as air interface, USB interface and infrared data interface between WCDMA terminal and WCDMA network equipment. The User Equipment shall include Mobile Equipment (ME) which can transmit and receive wireless signals, baseband processing and higher-layer application operation, and a detachable smart card USIM which can store data, programs and security identification. ME and USIM are connected by standard Cu interface. ME can be logically further classified into smaller unit equipment, which are Mobile Termination (MT) responsible for wireless reception and transmission and related functions, and Terminal Equipment (TE) responsible for operating end-to-end higher-layer applications, as shown in Figure 1. MT and TE can be connected by a variety of physical means (wired or wireless).
Figure 1 Logical Structure of WCDMA UE
In the logical structure diagram of WCDMA shown in Figure 2, UE is connected with Radio Network Subsystem (RNS) through WCDMA air interface (Uu interface), and communicates with Core Network (CN) through this access subsystem, thus completing the whole end-to-end service connection.
Figure 2 Position of UE in the Logical Structure of WCDMA System
5 Classification and Power Class of UE
5.1 Classification of UE
According to the size and application range of terminals, UE can be roughly classified as follows:
(a) Hand-held station (handset): ME that is small in size, suitable for hand-held and can independently support WCDMA telecommunication services and/or bearer services.
(b) On-board station: ME that cannot be used alone and needs to be installed/connected to a motor vehicle and can support WCDMA telecommunication services and/or bearer services. In general, its maximum transmit power class is larger than that of hand-held stations.
(c) Fixed wireless access station: ME that can support WCDMA telecommunication services and/or bearer services by replacing the wired connection of traditional fixed stations with wireless connection through WCDMA air interface technology. In general, its maximum transmit power class is larger than that of hand-held station, and external power supply is needed.
(d) Data card: MT that cannot be used independently and need to be connected with other equipment such as laptops or PDAs to support WCDMA telecommunication services or bearer services.
(e) Other terminals: MTs that do not belong to the above types and can be used independently or in conjunction with
Foreword i
1 Scope
2 Normative References
3 Abbreviations and Symbols
4 General
5 Classification and Power Class of UE
6 Services
7 Functions
8 RF Performance
9 Audio Requirements
10 Interface Requirements
11 Requirements of Environment and Reliability
12 Requirements of Standby Time and Talk time of Mobile Station
13 Requirements of Electromagnetic Compatibility (EMC)
14 Requirements of Specific Absorption Rate (SAR)
15 Requirements of Battery and Charger
16 Appearance, Packaging and Assembly Requirements
Annex A (Normative) Environmental Conditions
Annex B (Normative) Measurement Channel
Annex C (Normative) Propagation Conditions
Annex D (Normative) Downlink Physical Channel
Annex E (Normative) Radio Resource Management
Bibliography
