T/CSIQ 8008-2018 Town footwear
1 Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, and requirements of marking, packaging, transportation and storage of town footwear manufactured by various techniques.
This standard is applicable to town footwear for daily wearing.
This standard is not applicable to town footwear (boots) worn by infants and children.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
。。。。
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2703-2008 and the following apply. For the convenience of application, some terms and definitions specified in GB/T 2703-2008 are listed below.
3.1
town footwear
footwear designed and manufactured for office and etiquette occasions
[GB/T 2703-2008, 2.2.31]
4 Classification
4.1 Men's and women's town footwear (boots) according to the wearing objects.
4.2 Town footwear (boots) with upper made from natural leather (top layer leather, split leather of animal such as pig, cattle and sheep), upper made from artificial material (artificial leather, synthetic leather, etc.), and upper made from mixed materials according to the upper materials.
5 Technical requirements
5.1 General requirements
5.1.1 Shoe size shall meet the requirements of GB/T 3293.1.
5.1.2 Last size shall meet the requirements of GB/T 3293.
5.1.3 The shoe materials shall meet the requirements of corresponding product standards.
5.1.4 The defect which affects wearing shall be avoided.
5.2 Markings
It shall meet the requirements of QB/T 2673-2013.
5.3 Requirements for marking upper material
5.3.1 The marking of upper material shall meet the requirements of 5.1.4 in QB/T 2673-2013.
5.3.2 The marking of upper material shall be consistent with the material used.
5.4 Appearance quality
Th
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transportation and storage
Annex A (Normative) List of 24 harmful aromatic amines
