1 Subject content and applicable scope
This standard specifies the technical conditions of three quality grades of solvent oil for rubber industry obtained from straight-run crude oil fraction or catalytic reforming raffinate oil.
The products covered by this standard are used as solvent oil for rubber industry.
2 Normative references
GB/T 259 Petroleum products - Determination of water-soluble acids and alkalis
GB/T 260 Test method for water in petroleum products
GB/T 380 Determination of sulfur content in petroleum products (lamp method)
GB/T 511 Petroleum products and additives - Determination of mechanical impurities - Gravimetric method
GB/T 1884 Petroleum and liquid petroleum products - Determination of density - Hydrometer method
GB/T 1885 Petroleum measurement tables
GB/T 4756 Petroleum liquids - Manual sampling
GB/T 6536 Petroleum products - Determination of distillation
SH 0164 Rules for packaging, storage, transportation, and acceptance of delivery of petroleum products
SH/T 0166 Determination of C6-C9 aromatic hydrocarbons in reformed raw oil and produced oil (gas chromatography)
SH/T 0174 Aromatic hydrocarbon and clean oils - Qualitative test of thioalcohol (doctor test)
SH/T 0236 Determination of bromine in petroleum products
SH/T 0253 Determination of total sulfur content in light petroleum products (coulometric method)
Note: Unless otherwise specified in the standard, the editions of the above normative references currently in force shall prevail.
3 Technical contents
3.1 Quality grade of product
